【国外标准】 Standard Test Methods for Chemical Analysis of Hydraulic Cement

AbstractThese test methods cover the chemical analyses of hydraulic cements. Specific chemical test methods are grouped as reference test methods and alternative test methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements and are also required for referee analysis in those cases where conformance to chemical specification requirements are questioned. Apparatus and materials for the test method include balance, weights, glassware and laboratory containers, desiccators, filter paper, crucibles, and muffle furnace. Standard reagents for the test method shall be used within the limits of the specification. These reagents shall include purity agents, water, repackaged reagents, concentrated acids and ammonium hydroxide, nonstandardized solutions, and indicator solutions. Sample preparation and general test procedures shall be followed according to the specification. General procedures include sample weighing, taring of crucibles, weighing of ignited residues, volatilization of platinum, chemical analyses, and calculation. Reporting of analyses shall be of the following order: major components, minor components, and separate determinations. Reference test methods and procedures include determination of insoluble residue, silicon dioxide, ammonium hydroxide group, ferric oxide, phosphorus pentoxide, titanium dioxide, zinc oxide, aluminum oxide, calcium oxide, magnesium oxide, sulfur, loss on ignition, sodium and potassium oxides, manganic oxide, chloride, chloroform-soluble organic substances. Alternative test methods and procedures include determination of calcium oxide, calcium dioxide, magnesium oxide, loss on ignition, titanium dioxide, phosphorus pentoxide, manganic oxide, and free calcium oxide. The standardization used for qualification and for analysis of each constituent shall be determined by valid curve-fitting procedures.1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section 4. Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted classical chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific analytes and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.1.2 Contents: Section Subject2 Referenced Documents4 Description of Referee Analyses4.1 Referee Analyses5 Qualification for Different Analyses5.1 Certified Reference Materials5.2 Requirements for Qualification Testing5.3 Alternative Analyses5.4 Performance Requirements for Rapid Test Methods6 General6.1 Interferences and Limitations6.2 Apparatus and Materials6.3 Reagents6.4 Sample Preparation6.5 General Procedures6.6 Recommended Order for Reporting Analyses     Reference Test Methods7 Insoluble Residue8 Silicon Dioxide8.2 Cements with Insoluble Residue Less Than 1 %8.3 Cements with Insoluble Residue Greater Than 1 %9 Ammonium Hydroxide Group10 Ferric Oxide11 Phosphorus Pentoxide12 Titanium Dioxide13 Zinc Oxide14 Aluminum Oxide15 Calcium Oxide16 Magnesium Oxide17 Sulfur17.1 Sulfur Trioxide17.2 Sulfide18 Loss On Ignition18.1 Portland Cement18.2 Portland Blast-Furnace Slag Cement and Slag Cement19 Sodium and Potassium Oxides19.1 Total Alkalis19.2 Water-Soluble Alkalis20 Manganic Oxide21 Chloride22 Chloroform-Soluble Organic Substances     Alternative Test Methods23 Calcium Oxide24 Carbon Dioxide25 Magnesium Oxide26 Loss on Ignition26.1 Portland Blast-Furnace Slag Cement and Slag Cement27 Titanium Dioxide28 Phosphorus Pentoxide29 Manganic Oxide30 Free Calcium Oxide     AppendicesAppendix X1 Example of Determination of Equivalence Point for the Chloride DeterminationAppendix X2 CO2 Determinations in Hydraulic Cements1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.