
【国外标准】 Contact Start/Stop Storage Disk, 95840 Flux Transitions per Track, 7.874 Inch (200 mm) Outer Diameter and 2.500 Inch (63.5 mm) Inner Diameter
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Provides the mechanical, physical and magnetic properties of a magnetic disk with an 7.874-in (200-mm) diameter and low surface friction intended for mounting in data storage devices. A typical recording density is 480 tpi with 6858 fluxtransitions per inch (ftpi) at a radius of 2.224 in (56,49 mm).
标准号:
INCITS 120-1984 (S2017)
标准名称:
Contact Start/Stop Storage Disk, 95840 Flux Transitions per Track, 7.874 Inch (200 mm) Outer Diameter and 2.500 Inch (63.5 mm) Inner Diameter
英文名称:
Contact Start/Stop Storage Disk, 95840 Flux Transitions per Track, 7.874 Inch (200 mm) Outer Diameter and 2.500 Inch (63.5 mm) Inner Diameter标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS 119-1984 (S2017) Contact Start/Stop Storage Disk, 158361 Flux Transitions per Track, 8.268 Inch (210 mm) Outer Diameter and 3.937 Inch (100 mm) Inner Diameter
- 下一篇: INCITS 121-1984 (S2021) Two-Sided Unformatted 8-Inch (200 MM) Double Density Flexible Disk Cartridge (For 13262 FTPR Two-headed Application) (Combined with Project 287)
- 推荐标准
- AS 2542.1.2-1984 Sensory analysis of foods General guide to methodology - Types and choice of test
- AS 2699-1984 Wall ties for masonry construction (incorporating Amdt 1 1986)
- AS 2701.1-1984 Methods of sampling and testing mortar for masonry construction Scope and general
- AS 2701.10-1984 Methods of sampling and testing mortar for masonry construction Methods for chemical analysis of mortars
- AS 2701.6-1984 Methods of sampling and testing mortar for masonry construction Method for determination of consistency - Cone impression test
- AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
- AS 2718 (Pt 1 to 2)-1984 Plastics pipes and fittings for gas reticulation - Polyethylene - Outside diameter series
- AS 2724.3-1984 Ambient air - Particulate matter Determination of total suspended particulates (TSP) - High volume sampler gravimetric method
- AS 2735-1984 Dry-type power transformers
- AS 2738.1-1984 Copper and copper alloys - Compositions and designations Refinery products
- AS 2738.2-1984 Copper and copper alloys - Compositions and designations Wrought products
- AS 2740-1984 Lifting tackle - Wedge type sockets
- AS 4123.7-2006 (R2017)/Amdt 1-2008 Mobile waste containers Colours, markings, and designation requirements
- AS/ACIF S003:2006 Customer Access Equipment for connection to a Telecommunications Network
- AS/NZS 1301.001s:2002 (R2013) Methods of test for pulp and paper Basic density of pulpwood