
【国外标准】 IEEE Standard Microcomputer Environmental Specifications for Computer Modules
本网站 发布时间:
2025-04-28
- IEEE 1156.1-1993
- 定价: 150元 / 折扣价: 128 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification is designed for use in conjunction with other families of documents such as IEEE Std1101.x, IEEE Standard for Mechanical Core Specifications for Microcomputers; IEEE Std 896.x, IEEE Standard Backplane Bus Specification for Multiprocessor Architectures: Futurebus+; IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI); IEEE Std 1014-1987, IEEE Standard for a Versatile Backplane Bus: VMEbus; IEEE Std 1296-1987, IEEE Standard for a High-Performance Synchronous 3… read more 2-Bit Bus: MULTIBUS®2 II; and IEEE Std 1301-1991, IEEE Standard for a Metric Equipment Practice for Microcomputers—Coordinating Document. This standard is intended to be used as a core specification. It contains the minimum environmental withstand conditions that are applicable to computer modules/circuit boards and all of the components attached to those modules. It has been created to provide general environmental withstand conditions for one or more of the previously listed computer buses or interconnect standards. It may also apply to electronic equipment in general. read less
标准号:
IEEE 1156.1-1993
标准名称:
IEEE Standard Microcomputer Environmental Specifications for Computer Modules
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE/ANSI C57.12.22-1995 [ Withdrawn ] American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
- 下一篇: IEEE 1301.3-1992 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors
- 推荐标准
- ASTM ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials
- ASTM ISO/ASTM52911-1-19 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals
- ASTM E1993/E1993M-98(2020) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
- ASTM D1993-22 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
- AS 2545-1987/Amdt 1-2000 Subcontract conditions
- AS 2545/B-1993 (Reference Use Only) Subcontract conditions (AS 2545-1993) - Annexure Part B
- AS 2548.1-1998 Battery chargers for lead-acid traction batteries Battery chargers for vented cells
- AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
- AS 2550.10-2006/Amdt 1-2009 Cranes, hoists and winches - Safe use Mobile elevating work platforms
- AS 2550.5-1993 Cranes - Safe use Mobile and vehicle-loading cranes
- AS 2550.7-1996/Amdt No. 1-1999 Cranes - Safe use - Builders' hoists and associated equipment
- AS 2582.1-1983 Complete, filled transport packages - Methods of test Identification of parts when testing
- AS 2582.7-1983/Amdt 1-1986 Complete, filled transport packages - Methods of test - Low pressure test
- AS 2593-1995/Amdt 1-1998 Boilers - Unattended and limited attendance
- AS 2593-2004 (R2016)/Amdt 1-2007 Boilers - Safety management and supervision systems