- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- CSA >>
- B149HB-05_EN Natural Gas and Propane Code Handbook
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This is the fourth edition of CSA's B149HB, Natural Gas and Propane Code Handbook. It supersedes the previous editions, published in 2000 by CSA and in 1995 and 1991 by the Canadian Gas Association.
1. SCOPE
The scope of this handbook is limited to Cla
标准号:
B149HB-05_EN
标准名称:
Natural Gas and Propane Code Handbook
英文名称:
Natural Gas and Propane Code Handbook标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 推荐标准
- ASTM B887-24 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- AS EN 12079.1-2010 Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
- AS EN 12079.2-2010 Offshore containers and associated lifting sets Lifting sets - Design, manufacture and marking (EN 12079-2:2006, MOD)
- AS EN 12182-2002 Technical aids for disabled persons - General requirements and test methods
- AS EN 50064-2008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
- ASTM A348/A348M-05(2021) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
- ASTM A350/A350M-24b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- ASTM A470/A470M-05(2020) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
- ASTM A470/A470M-05(2025) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
- ASTM A480/A480M-23b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A6/A6M-24b Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM A941-25b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- ASTM B1-13(2018) Standard Specification for Hard-Drawn Copper Wire
- ASTM B100-20 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
我的标准
购物车
400-168-0010










