
【国外标准】 IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
本网站 发布时间:
2025-06-05
- IEEE C57.12.14-1982
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This standard prescribes insulation levels and dielectric test requirements for power transformers where : (1) The transformer insulation levels and dielectric test requirements are explicitly specified to be in accordance with this standard (2) The transformers are to be operated at system voltages from 115 kV through 230 kV (3) The transformer has a rating, either singlephase or three-phase, equal to or greater than 30 000 kVA self-cooled or 50 000 kVA forcedcooled 1.2 These requirements,… read more when specified, supersede all requirements relative to insulation levels and dielectric tests as contained in ANSI/ IEEE C57.12.00-1980 [4] ' and ANSI/IEEE C57.12.90-1980 [ 51. 1.3 Unless explicitly specified, this standard shall be considered as excluded in the event of any blanket reference to all current standards. read less
标准号:
IEEE C57.12.14-1982
标准名称:
IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
英文名称:
IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
- ASTM D6737-12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- ASTM D6957-12(2025) Standard Practice for Measuring Curl in Paint Brush Filling Material
- ASTM D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D7108-12(2018) Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
- ASTM D7167-12(2018) Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
- ASTM D7338-14(2023) Standard Guide for Assessment Of Fungal Growth in Buildings
- ASTM D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
- ASTM D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- ASTM D7408-12(2020) Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
- ASTM D7495-12(2019) Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
- ASTM D7525-14(2019)e1 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM D7545-14(2019)e1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography