
【国外标准】 INCITS Technical Report for Information Technology v Fibre Channel v Avionics Environment v Anonymous Subscriber Messaging (FC-AE-ASM)

适用范围:
Fibre Channel Avionics Environment (FC-AE), Technical Report INCITS TR-31-2002 [2], is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in commercial and military aerospace industries. The primary areas of interest include avionic command, control, instrumentation, simulation, signal processing, and sensor/video data distribution. These application areas are characterized by a variety of requirements, among them a need for high reliability, fault tolerance, and deterministic behavior to support real-time control/response.
The FC-AE-2 task group determined that it was best to allow profiles defined in the FC-AE technical report to be updated independently. This technical report is the first update to the FC-AE-ASM protocol since FC-AE was released. This technical report is recommended for new designs, but does not obsolete clause 4.1 in INCITS TR-31-2002 [2].
The primary objective of this technical report is to maximize the likelihood of interoperability between conforming implementations. This technical report Prohibits or Requires features that are optional and Prohibits the use of some non-optional features in the referenced ANSI INCITS standards. A second objective of this technical report is to simplify implementations and their associated documentation, testing, and support requirements. This technical report does not define internal characteristics of conformant implementations. This technical report incorporates features from the referenced ANSI INCITS standards.
标准号:
INCITS/TR-41-2006 (R2016)
标准名称:
INCITS Technical Report for Information Technology v Fibre Channel v Avionics Environment v Anonymous Subscriber Messaging (FC-AE-ASM)
英文名称:
INCITS Technical Report for Information Technology v Fibre Channel v Avionics Environment v Anonymous Subscriber Messaging (FC-AE-ASM)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4782-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
- ASTM D4801-08(2016) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
- ASTM D5611-94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
- ASTM D6058-96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
- ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- AS 2550.10-2006/Amdt 1-2009 Cranes, hoists and winches - Safe use Mobile elevating work platforms
- AS 2593-2004 (R2016)/Amdt 1-2007 Boilers - Safety management and supervision systems
- AS 2613-2005 (R2016)/Amdt 1-2007 Safety devices for gas cylinders
- AS 2617-1996 (R2013) Sampling from coal seams
- AS 2805.4.1-2001 (R2016)/Amdt 1-2006 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanism using a block cipher
- AS 2805.6.1.1-2009 (R2019)/Amdt 1-2011 Electronic funds transfer - Requirements for interfaces Key management - Principles
- AS 2806.1-2003 (R2013) Aluminium ores - Sampling Sampling procedures
- AS 2806.3-2001 (R2013) Aluminium ores - Sampling Preparation of samples
- AS 2806.5-2003 (R2013) Aluminium ores - Sampling Methods for checking the precision of sampling
- AS 2806.6-2003 (R2013) Aluminium ores - Sampling Methods for checking the bias of sampling