
【国外标准】 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)
本网站 发布时间:
2024-02-28
- ASTM E2025-99(2006)
- Withdrawn, No replacement
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This test method is intended for determining the ability of a fenestration component, fenestration assembly, or impact protection system to resist specified impact energies. The test apparatus, referenced herein, is capable of applying a variety of impacts to a specimen as the impactor head may be fabricated into a variety of shapes and from materials having different degrees of hardness. The user is able to simulate a specific type of impact and the impact energy with this apparatus. There is a need to correlate the damage to fenestration assemblies from the impacts in question with the impacts delivered by the test apparatus in order for the test results to be properly interpreted. Due to the nature of the test apparatus, care must be taken when interpreting the results of a specific test to actual performance in the field. The impact energies involved in a pendulum impact cannot be directly transferred to impact energies applied by other devices, for example, projectiles; therefore, the performance of a specimen to the impacts applied by this test method are not directly transferable to performance in actual use. The application of impact energies to a specimen, as applied in this test method, however, does provide valuable information regarding the ability of the specimen to resist damage when impacted. Note 1—Use Test Method E 1886 for determining the performance of fenestration components subjected to impacts from windborne debris in a windstorm environment. When using this test method to compare the performance of products the same impact nose, impact device mass and impact speed must be applied to each product tested. 1.1 This test method covers the evaluation of the resistance of fenestration components, fenestration assemblies, and impact protection systems to specified impact energies. 1.2 Window, glazed door, and skylight assemblies covered by this test method also include individual components, such as the glazing in-fill.This standard does no purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E2025-99(2006)
标准名称:
Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)
英文名称:
Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2550.10-2006/Amdt 1-2009 Cranes, hoists and winches - Safe use Mobile elevating work platforms
- AS 2805.4.1-2001 (R2016)/Amdt 1-2006 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanism using a block cipher
- AS 3524-2006 Identification cards - Financial transaction cards
- AS 3669-2006 Non-destructive testing - Qualification and approval of personnel - Aerospace
- AS 3775.1-2004/Amdt 1-2006 Chain slings - Grade T Product specification
- AS 3776-2006 Lifting components for Grade T chain slings
- AS 3785.1-2006 Underground mining - Shaft equipment Shaft overwind safety catch system
- AS 3785.7-2006/Amdt 1-2011 Underground mining - Shaft equipment Sheaves
- AS 3806-2006 Compliance programs
- AS 3818.7-2006 Timber - Heavy structural products - Visually graded Large cross-section sawn hardwood engineering timbers
- AS 3853.1-2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of airborne particles
- AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
- AS 4024.1201-2006 Safety of machinery General principles - Basic terminology and methodology
- AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
- AS 4024.1302-2006 Safety of machinery Risk assessment - Reduction of risks to health and safety from hazardous substances emitted by machinery - Principles and specifications for machinery manufacturers