购物车
400-168-0010
【国外标准】 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)
本网站 发布时间：
2024-11-18
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
BS 2HR 506:2010
标准名称：
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)
英文名称：
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)标准状态：
被代替-
发布日期：
2010-11-30 -
实施日期：
出版语种：
- 其它标准
- 上一篇： BS 2HR 505:2010 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
- 下一篇： BS 2HR 51:2010 Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C)
- 推荐标准
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- ASTM A2-02(2020) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
- ASTM A506-16(2021) Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
- ASTM B2-13(2018) Standard Specification for Medium-Hard-Drawn Copper Wire
- ASTM B506-22 Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
- ASTM C506-22a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
- ASTM D2010/D2010M-98(2017) Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
- AS/NZS 60745.1:2003/Amdt 2:2004 Hand-held motor-operated electric tools - Safety General requirements
- AS/NZS 60745.2.13:2010/Amdt 1:2011 Hand-held motor-operated electric Tools - Safety Particular requirements for chain saws
- AS/NZS 61558.2.16:2010 (IEC TEXT)/Amdt 1:2010 Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements for switch mode power supply units and transformers for switch mode power supply units
