【国外标准】 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip (Withdrawn 2021)

This guide covers rolled nickel-chromium-molybdenum-tungsten alloys plate, sheet, and strip. The material shall be composed of carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, tungsten, molybdenum, iron, aluminum, titanium, nickel, and copper. The material shall be uniform in quality and temper, smooth, commercially straight or flat, and free of injurious imperfections. Tension test specimens shall be taken from material in the final condition and tested transverse to the direction of rolling when width will permit. Inspection of the material shall be made as agreed upon between the manufacturer and the purchaser as part of the purchase contract.1.1 This specification covers rolled nickel-chromium-molybdenum-tungsten alloys (UNS N06110)2 plate, sheet, and strip.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.