【国外标准】 Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 A dense, uniform, smooth, and vigorously growing natural turfgrass sports field provides the ideal and preferred playing surface for most outdoor field sports. Such a surface is pleasing to the spectators and athletes. A thick, consistent, and smooth grass cover also increases playing quality and safety by providing stable footing for the athletes, cushioning their impact from falls, slides, or tackles, and cools the playing surface during hot weather. Sand is commonly used to construct high performance sports turf rootzone systems. Sand is chosen as the primary construction material for two basic properties, compaction resistance and improved drainage/aeration state. Sands are more resistant to compaction than finer soil materials when played upon within a wide range of soil moisture conditions. A loamy soil that may provide a more stable surface and enhanced growing media compared to sand under optimal or normal conditions will quickly compact and deteriorate in condition if used in periods of excessive soil moisture, such as during or following a rainy season. A properly constructed sand-based rootzone, on the other hand, will resist compaction even during wet periods. Once compacted, sands are easier to decompact with the use of mechanical aeration equipment. Even when compacted, sands will retain an enhanced drainage and aeration state compared to native soil rootzones under the same level of traffic. As such, sand-based rootzones are more conducive to providing an all-weather type of playing surface. Properties of both the soil and grass plants must be considered in planning, constructing, and maintaining a high quality sports turf installation. Turfgrass utilized must be adapted to the local growing conditions and be capable of forming a thick, dense, turf cover at the desired mowing height. Unvegetated sand in and of itself is not inherently stable; therefore, it is imperative that grasses with superior wear tolerance and superior recuperative potential are utilized to withstand heavy foot traffic and intense shear forces. Sand does, however, have incredible load bearing capacity and if a dense, uniform turf cover is maintained, the sand-based system can provide a very stable, firm, smooth, and uniform playing surface. A successful sand-based rootzone system is dependent upon the proper selection of materials to use in the project. The proper selection of sand, organic amendment, soil and gravel is of vital concern to the performance of the system and this guide addresses these issues.4.1.1 During construction, consideration should be given to factors such as the physical and chemical properties of materials used in the area, freedom from stones and other debris, and surface and internal drainage.4.1.2 Maintenance practices that influence the playability of the surface include mowing, irrigation, fertilization, and mechanical aeration and are factors addressed in other standards (see Guides F2060 and F2269).4.2 Those responsible for the design, construction, or maintenance, or a combination thereof, of natural turf athletic fields for high-performance, all-weather purposes will benefit from this guide.4.3 A successful project development depends upon proper planning and upon the selection of and cooperation among design and construction team members. A high-performance, sand-based rootzone project design team should include a project designer, an agronomist or soil scientist, or both, and an owner’s representative. Additions to the team during the construction phase should include an owner’s project manager (often an expansion of role for the owner’s representative), an owner’s quality control agent (often the personnel that is employed in advance with the intent of becoming the finished project’s sports field manager), an owner’s testing agent (often an expansion of roles for the project’s agronomist/soil scientist), and the contractor.4.3.1 Planning for projects must be conducted well in advance of the intended construction date. This often requires numerous meetings to create a calendar of events, schedule, approvals, assessments, performance criteria, material sourcing, geotechnical reports, and construction budgets.NOTE 2: Other specifications on soils for athletic field construction have been published and have been considered during the development of this guide.AbstractThis guide provides selection criteria for deciding the appropriate techniques and materials, including soil, sand, gravel, peat, and so forth, needed in the design, construction, and maintenance of high performance sand-based turf rootzones for sports fields. The factors taken into account here that influence such decisions are existing soil types, climatic factors, level of play, intensity and frequency of use, equipment available, budget and training, and the ability of management personnel.1.1 This guide covers techniques that are appropriate for the construction of high performance sand-based rootzones for sports fields. This guide provides guidance for the selection of materials, including soil, sand, gravel, peat, and so forth, for use in designing and constructing sand-based sports turf rootzones.1.2 Decisions in selecting construction and maintenance techniques are influenced by existing soil types, climatic factors, level of play, intensity and frequency of use, equipment available, budget and training, and the ability of management personnel.1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “standard” in the title of this document means only that the document has been approved through the ASTM consensus process.1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.5 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2396-11(2019)
标准名称:
Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
英文名称:
Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard