我的标准
购物车
400-168-0010
【国外标准】 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
本网站 发布时间：
2024-07-29
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
BS S 532:1969
标准名称：
Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)
英文名称：
Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 980/1180 MPa)标准状态：
现行-
发布日期：
2003-05-27 -
实施日期：
出版语种：
- 其它标准
- 上一篇： BS S 531:1970 Specification for 24/17 chromium-nickel heat-resisting steel sheet and strip (niobium stabilized: 54 hbar) (elevated temperature properties not verified)
- 下一篇： BS S 533:1969 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel sheet and strip (precipitation hardening: 1180/1370 MPa)
- 推荐标准
- ANSI INCITS 263-1995 (S2010) Fibre Distributed Data Interface (FDDI) - Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD) (formerly INCITS 263-1995 (R2005))
- ANSI X9.100-150-2010 (S2022) Check Carrier Envelopes
- ANSI X9.100-151-2010 (S2022) Check Correction Strips
- ANSI X9.100-161-2010 (S2022) Creating MICR Document
- ANSI X9.100-170-2010 (S2022) Specification Forms
- ANSI X9.100-180-2006 (S2018) Specifications for Electronic Exchange of Check and Image Data (non-domestic) (Formerly published as DSTU X9.37-2003)
- ANSI X9.100-183-2010 (S2022) Electronic Check Adjustments
- ANSI X9.12-1991 (S2017) Specifications For Fully Registered Municipal Securities
- AS 1104S-1978 (5001) Informative symbols for use on electrical and electronic equipment - Battery Check
- AS 1301.002s-1991 Methods of test for pulp and paper Preparation of wood samples for chemical analysis
- AS 1301.405s-1992 Methods of test for pulp and paper Grammage of non-creped paper and board
- AS 1301.420s-1989 Methods of test for pulp and paper (metric units) Gurley air permanence of paper
- AS 1301.424s-1989 Methods of test for pulp and paper (metric units) Determination of titanium dioxide in paper, paperboard, pigments and fillers
- AS 1301.436s-1991 Methods of test for pulp and paper (metric units) Measurement of diffuse reflectance factor
- AS 1301.437s-1989 Methods of test for pulp and paper (metric units) Tensile strength of wetted paper and paperboard
