
【国外标准】 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)
本网站 发布时间:
2024-02-28
- ASTM A591/A591M-98
- Withdrawn, Replaced
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 This specification covers steel sheet in coils and cut lengths that are zinc-coated by electro-deposition.1.2 The electrolytic zinc-coated sheet covered by this specification is produced with a light (thin) coating mass. The coating designations and coating masses are listed in Table 1.1.3 This product is intended for the manufacture of formed or miscellaneous parts; the zinc coating is used to provide some enhancement in corrosion performance as compared to an uncoated sheet. It is not intended to withstand outdoor exposure without chemical treating and painting.1.4 The electrolytic zinc-coated sheet covered by this specification is produced as commercial quality (CQ), drawing quality (DQ), drawing quality special killed (DQSK), structural (physical) quality (SQ), and high-strength, low-alloy (HSLA).1.5 The product is available in three zinc-coating classes, as listed in Table 1.1.6 For purposes of determining conformance with this specification, values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.1.7 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. See 4.2.2 for proper reference when ordering.
标准号:
ASTM A591/A591M-98
标准名称:
Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)
英文名称:
Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)标准状态:
Withdrawn, Replaced-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM A876-17e1 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
- ASTM A877/A877M-17(2023) Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
- ASTM A878/A878M-19 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
- ASTM A882/A882M-20 Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
- ASTM A886/A886M-17 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
- ASTM A887-20 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
- ASTM A888-23 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
- ASTM A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
- ASTM A893/A893M-03(2022) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
- ASTM A899-91(2021) Standard Specification for Steel Wire, Epoxy-Coated
- ASTM A901-19 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
- ASTM A902-23a Standard Terminology Relating to Metallic Coated Steel Products
- ASTM A903/A903M-99(2017) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
- ASTM A904-20 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
- ASTM A906/A906M-02(2022) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting