我的标准
购物车
400-168-0010
【国外标准】 Information technology - Office equipment - Method for measuring digital copying productivity of a single one-sided original
本网站 发布时间：
2024-08-08
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
ISO/IEC 29183:2010 specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. It is applicable to digital copying devices and multifunctional devices. It is intended to be used for black-and-white and colour digital copying devices and multifunctional devices of any underlying marking technology. ISO/IEC 29183:2010 includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements.
ISO/IEC 29183:2010 is not intended to replace manufacturer's rated speeds.
标准号：
INCITS/ISO/IEC 29183-2010[2011]
标准名称：
Information technology - Office equipment - Method for measuring digital copying productivity of a single one-sided original
英文名称：
Information technology - Office equipment - Method for measuring digital copying productivity of a single one-sided original标准状态：
现行-
发布日期：
-
实施日期：
出版语种：
- 其它标准
- 上一篇： INCITS/ISO/IEC 29182-7:2015 (2021) Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines
- 下一篇： INCITS/ISO/IEC 29183:2010 (R2021) Information technology -- Office equipment -- Method for measuring digital copying productivity of a single one-sided original
- 推荐标准
- AS ISO 140.8-2006 Acoustics - Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
- AS ISO 14021(Int)-1998 Environmental labels and declarations - Self-declared environmental claims
- AS ISO 14155-2002 Clinical investigation of medical devices
- AS ISO 14520.11-2009 Gaseous fire-extinguishing systems - Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD)
- AS ISO 14520.13-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD)
- AS ISO 14520.15-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-541 extinguishant (ISO 14520-15:2005, MOD)
- AS ISO 14520.5-2009 Gaseous fire-extinguishing systems - Physical properties sand system design FK-5-1-12 extinguishant (ISO 14520-5:2006, MOD)
- AS ISO 14520.6-2009 Gaseous fire-extinguishing systems - Physical properties and system design HCFC Blend A extinguishant (ISO 14520-6:2006, MOD)
- AS ISO 14602-2003 Non-active surgical implants - Implants for Osteosynthesis - Particular requirements
- AS ISO 14708.1-2003 Implants for surgery - Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer
- AS ISO 15489.2-2002 (R2013) Records management Guidelines
- AS ISO 15801-2006 Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability
- AS ISO 16949-2003 Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
- AS ISO 16949-2003/Amdt 1-2004 Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
- AS ISO 18434.1:2014 Condition monitoring and diagnostics of machines - Thermography General procedures
