
【国外标准】 IEEE/IEC International Standard for Subsea equipment--Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)
本网站 发布时间:
2025-04-28
- IEEE/IEC 61886-1-2021
- 定价: 110元 / 折扣价: 94 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This document is applicable to single and three-phase wet-mateable and dry-mateable AC connectors, penetrators and jumper assemblies with rated voltages from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV). This document relates to the requirements and tests for products in the "as manufactured and supplied" condition. This document is not applicable to requirements and tests for products that have been subsequently installed, deployed or retrieved.
标准号:
IEEE/IEC 61886-1-2021
标准名称:
IEEE/IEC International Standard for Subsea equipment--Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D4439-24e1 Standard Terminology for Geosynthetics
- ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
- ASTM F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- AS 2205.4.1-1997 Methods for destructive testing of welds in metal - Nick-break test
- AS 2205.5.1-1997 Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
- AS 2205.6.1-1997 Methods for destructive testing of welds in metal - Weld joint hardness test
- AS 2205.7.1-1997 Methods for destructive testing of welds in metal - Charpy V-notch impact fracture toughness test
- AS 2205.9.1-1997 Methods for destructive testing of welds in metal - Hot cracking test
- AS 2213.1-2001/Amdt 1-2002 Commercial road vehicles - Mechanical connections between towing vehicles Selection and marking of pin-type couplings and drawbar eyes
- AS 2219.1.1-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to hot sodium hydroxide
- AS 2219.1.3-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to boiling hydrochloric acid
- AS 2219.1.5-1978 Methods of test for vitreous enamel coatings Chemical tests - Determination of resistance of vitreous enamel coatings to citric acid at room temperature
- AS 2219.2.1-1978 Methods of test for vitreous enamel coatings Physical tests - Determination of resistance of vitreous enamel coatings on steel to thermal shock