- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- BSI >>
- BS 2782-2 Method 205 to 207:1957 Methods of testing plastics. Electrical properties Method 205, 206 and 207 power factor and permittivity at 50 cycles per second, power factor and permittivity at 800 to 1600 cycles per second, power factor and permittivity at 10 kilocycles to 100 megacycles per second

【国外标准】 Methods of testing plastics. Electrical properties Method 205, 206 and 207 power factor and permittivity at 50 cycles per second, power factor and permittivity at 800 to 1600 cycles per second, power factor and permittivity at 10 kilocycles to 100 megacycles per second
本网站 发布时间:
2023-02-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
BS 2782-2 Method 205 to 207:1957
标准名称:
Methods of testing plastics. Electrical properties Method 205, 206 and 207 power factor and permittivity at 50 cycles per second, power factor and permittivity at 800 to 1600 cycles per second, power factor and permittivity at 10 kilocycles to 100 megacycles per second
英文名称:
Methods of testing plastics. Electrical properties Method 205, 206 and 207 power factor and permittivity at 50 cycles per second, power factor and permittivity at 800 to 1600 cycles per second, power factor and permittivity at 10 kilocycles to 100 megacycles per second标准状态:
被代替-
发布日期:
1957-04-03 -
实施日期:
出版语种:
- 推荐标准
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
- ASTM F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- ASTM C207-24 Standard Specification for Hydrated Lime for Masonry Purposes
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM ISO/ASTM52926-2-23 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB
- ASTM ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc
- ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
- AG 205-1998 (Amdts) Approval requirements for regulators for use with Liquefied Petroleum Gases