
【国外标准】 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This specification covers thermoplastic fabrics such as polyester, polyester/polyamide bicomponent, or composites with fiberglass or polyester scrims that can be used during the construction of cold-applied roofing and waterproofing. The thermoplastic fabrics shall be classified as: Type I; Type II; Type III; Type IV; Type V; Type VI; and Type VII. Fabrics shall conform to the thickness, mass, and physical properties specified. Tests shall be performed to determine the properties of the material in accordance with the following test methods: unit mass; thickness; breaking load and elongation; trapezoid tearing strength; and puncture strength.1.1 This specification covers thermoplastic fabrics such as polyester, polyester/polyamide bicomponent, or composites with fiberglass or polyester scrims that can be used during the construction of cold-applied roofing and waterproofing.1.2 This specification is intended as a material specification. Issues regarding the suitability of specific roof constructions or application techniques are beyond the scope of this specification.1.3 The specified tests and property values used to characterize the respective fabrics are intended to establish minimum properties. In-place system design criteria or performance attributes are factors beyond the scope of this material specification.1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D5665/D5665M-99a(2021)
标准名称:
Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
英文名称:
Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: ASTM D5664-17 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- 下一篇: ASTM D5666-95(2023) Standard Test Method for Rubber Chemical Antidegradants—Purity of p-Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
- 推荐标准
- ASTM E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
- ASTM E691-23 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E693-23 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
- ASTM E695-22 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
- ASTM E696-23 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
- ASTM E697-96(2019) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
- ASTM E699-16 Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
- ASTM E701-80(2018) Standard Test Methods for Municipal Ferrous Scrap
- ASTM E708-79(2017) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
- ASTM E709-21 Standard Guide for Magnetic Particle Testing
- ASTM E715-80(2022) Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM E724-21 Standard Guide for Conducting Static Short-Term Chronic Toxicity Tests Starting with Embryos of Four Species of Saltwater Bivalve Molluscs
- ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E726-01(2021) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides