- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM E413-22 Classification for Rating Sound Insulation
【国外标准】 Classification for Rating Sound Insulation
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 These single-number ratings correlate in a general way with subjective impressions of sound transmission for speech, radio, television, and similar sources of noise in offices and buildings. This classification method is not appropriate for sound sources with spectra significantly different from those sources listed above. Such sources include machinery, industrial processes, bowling allies, power transformers, musical instruments, many music systems, and transportation noises such as motor vehicles, aircraft and trains. For these sources, accurate assessment of sound transmission requires a detailed analysis in frequency bands. A single-number sound transmission rating for building façade elements is given in Classification E1332.4.2 The single-number ratings obtained can be used to compare the potential sound insulation of partitions or floors tested in laboratory conditions (STC) or the actual sound isolation between different suites in buildings (NNIC, NIC). The rating for a partition built and tested in a building may be lower than that obtained for a partition tested in a laboratory because of flanking transmission or construction errors.NOTE 1: A similar rating procedure, described in ISO 717-1:2020, provides single figure sound insulation ratings with a frequency range that extends from 100 to 3150 Hz with no maximum deficiency specified at individual frequencies. For most partitions, the two ratings differ by only one or two points.1.1 This classification covers methods of calculating single-number acoustical ratings for laboratory and field measurements of sound attenuation obtained in one-third octave bands.1.2 The name given to the single-number rating is assigned by the test method that invokes this classification.1.3 Test methods that invoke this classification include:1.3.1 Test Method E90—The single-number rating is called sound transmission class (STC).1.3.2 Test Method E336—Single number ratings are noise isolation class (NIC), normalized noise isolation class (NNIC), and apparent sound transmission class (ASTC).1.3.3 Test Method E596—The single-number rating is called noise isolation class (NIC).1.3.4 Test Method E1414—The single-number rating is called ceiling attenuation class (CAC).1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E413-22
标准名称:
Classification for Rating Sound Insulation
英文名称:
Classification for Rating Sound Insulation标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS ISO 8216-1:2024 - TC ) classification
- BS EN ISO 14456:2024 Gas cylinders. Gas properties and associated classification (FTSC) codes
- BS ISO 8216-1:2024 Products from petroleum, synthetic and renewable sources. Fuels (class F) classification
- 24/30487652 DC - Burglar resistance - Requirements and classification
- 24/30472573 DC combinations for submerged arc welding of high strength steels — Classification
- 24/30482384 DC shielded arc welding of creep-resisting steels — Classification
- 24/30482388 DC of stainless and heat resisting steels — Classification
- BS EN ISO 22042:2021+A1:2024 Blast chiller and freezer cabinets for professional use. Classification, requirements and test
- BS ISO 6893:2024 Jewellery and precious metals. Inspection of batches of small diamonds. Terminology, classification
- 24/30464617 DC BS ISO 4301-5 Cranes — Classification
- 24/30488981 DC resisting steel FE-PA2601 (A286), silver plated -Classification: 1 100 MPa/650 °C
- BS EN 2939:2024 - TC to head, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature
- BS ISO 24021-2:2024 Light gauge metal containers. Vocabulary and classification
- 24/30485474 DC and classification
- 24/30480623 DC and classification