
【国外标准】 Testing methods for paints -- Part 5: Mechanical property of film -- Section 6: Adhesion test (Cross-cut test)
本网站 发布时间:
2024-10-15
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
JIS K 5600-5-6:1999
标准名称:
Testing methods for paints -- Part 5: Mechanical property of film -- Section 6: Adhesion test (Cross-cut test)
英文名称:
Testing methods for paints -- Part 5: Mechanical property of film -- Section 6: Adhesion test (Cross-cut test)标准状态:
现行-
发布日期:
1999-04-20 -
实施日期:
出版语种:
- 推荐标准
- ASTM A6/A6M-24a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials
- ASTM D6/D6M-95(2018) Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
- ASTM E1999-23 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
- ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- ASTM G6-07(2020) Standard Test Method for Abrasion Resistance of Pipeline Coatings
- ASTM G6-07(2024) Standard Test Method for Abrasion Resistance of Pipeline Coatings
- ATS 4747.6-2008 Meters for non-urban water supply Installation and commissioning of open channel meters
- HB 101-1997 (CJC 5)/Amdt 1-1998 Coordination of power and telecommunications - Low Frequency Induction (LFI): Code of practice for the mitigation of hazardous voltages induced into telecommunications lines
- HB 102 (CJC 6)-1997/Amdt 1-1998 Coordination of power and telecommunications - Low Frequency Induction
- HB 102-1997 (CJC 6) Coordination of power and telecommunications - Low Frequency Induction (LFI): Application Guide to the LFI Code
- HB 142-1999 A basic introduction to managing risk
- SA/SNZ TS IEC 61000.3.5:2013 Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
- KS P ISO 5832-5 외과용 이식재 금속재료 제제5부부: 단련 코발트 크로뮴 텅스텐 니켈
- KS P ISO 5832-6 외과용 이식재 금속재료 제제6부부: 단련 코발트 니켈 크로뮴 몰리브데 넘 합금