
【国外标准】 Information technology -- Data centre facilities and infrastructures -- Part 2: Building construction
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237-1 in support of availability. Specifies requirements and recommendations for the following: a) location and site selection; b) building construction; c) building configuration; d) fire protection; e) quality construction measures. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document may be of assistance in meeting these standards and regulations. Conformance of data centres to the present document is covered in Clause 4.
标准号:
INCITS/ISO/IEC TS 22237-2:2018 (2019)
标准名称:
Information technology -- Data centre facilities and infrastructures -- Part 2: Building construction
英文名称:
Information technology -- Data centre facilities and infrastructures -- Part 2: Building construction标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC TS 22237-1:2018 (2019) Information technology -- Data centre facilities and infrastructures -- Part 1: General concepts
- 下一篇: INCITS/ISO/IEC TS 22237-2:2018 (R2024) Information technology - Data centre facilities and infrastructures - Part 2: Building construction, a Technical Report prepared by INCITS and registered with ANSI
- 推荐标准
- ASTM D7495-12(2019) Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
- ASTM D7500-15(2019) Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
- ASTM D7525-14(2019)e1 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM D7540-09(2019) Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
- ASTM D7545-14(2019)e1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
- ASTM D7556-10(2019) Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
- ASTM D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM D7663-12(2018)e1 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
- ASTM D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- ASTM D7666-12(2019) Standard Specification for Triglyceride Burner Fuel
- ASTM D7705/D7705M-12(2019) Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
- ASTM D7718-11(2019) Standard Practice for Obtaining In-Service Samples of Lubricating Grease
- ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
- ASTM D7768-12(2018) Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
- ASTM D7770-12(2019) Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method