
【国外标准】 Standard Test Method for Linear Measurement Using Precision Steel Rule
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This test method provides a means for measuring linear dimensions. Accurate measurement of dimensions can be critical to meeting specifications and characterizing process performance.4.2 This test method should not be applied to tolerance ranges of less than 3 mm (1/8 in.) when it is preferable that test error does not exceed 30 % of tolerance range. See Precision and Bias Section for gauge repeatability and reproducibility results.4.3 This test method does not address acceptability criteria. These need to be jointly determined by the user and producer of the product.1.1 This test method covers the measurement of linear dimension of flexible packages and packaging materials. It is recommended for use with an allowable tolerance range of 3 mm (1/8 in.) or greater based on gauge repeatability and reproducibility presented in the Precision and Bias section.1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2203-13(2022)
标准名称:
Standard Test Method for Linear Measurement Using Precision Steel Rule
英文名称:
Standard Test Method for Linear Measurement Using Precision Steel Rule标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2550.13-1997 Cranes- Safe use Building maintenance units
- AS 2805.13.1-2000/Amdt 1-2008 Electronic funds transfer - Requirements for interfaces Secure hash functions - General
- AS 2983.13-1987 Methods of test for synthetic sporting surfaces Determination of impact resistance
- AS 3572.13-1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes
- AS 3572.13-1989/Amdt 1-1990 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes
- AS 3706.13-2012 Geotextiles - Methods of test Determination of durability - Resistance to certain microbiological agents
- AS 4276.13-1995 Water microbiology Pseudomonas aeruginosa - Membrane filtration method
- AS 4969.13-2009 Analysis of acid sulfate soil - Dried samples - Methods of test Determination of acid neutralizing capacity by back-titration (ANCBT)
- AS 5013.13(Int)-2010 Food microbiology Milk and milk products - Detection of Enterobacter sakazakii
- AS ISO 14520.13-2009 Gaseous fire-extinguishing systems - Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD)
- AS/NZS 1580.481.1.13:1998 (R2013) Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of fungal or algal growth
- AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling
- AS/NZS 2022:2003/Amdt 1:2003 Anhydrous ammonia - Storage and handling
- AS/NZS 2891.13.1:2013 Methods of sampling and testing asphalt Determination of the resilient modulus of asphalt - Indirect tensile method
- AS/NZS 3200.2.13:2005 Medical electrical equipment Particular requirements for safety - Anaesthetic systems