
【国外标准】 Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)
本网站 发布时间:
- CAN/CSA-CEI/IEC 61000-4-17-02
- 现行
- 定价: 546元 / 折扣价: 465 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1 Scope
This part of IEC 61000 defines test methods for immunity to ripple at
the d.c. input power port of electrical or electronic equipment. This standard is applicable to low-voltage d.c. power ports of
equipment supplied by external rectifier syst
标准号:
CAN/CSA-CEI/IEC 61000-4-17-02
标准名称:
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)
英文名称:
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test (Adopted CEI/IEC 61000-4-17:1999, first edition, 1999-06, including Amendment 1:2001)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-CEI/IEC 61000-4-16-02 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz (Adopted CEI/IEC 61000-4-16:1998, first edition, 1998-01, including Amend
- 下一篇: CAN/CSA-CEI/IEC 61000-4-2-01(R2009) Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
- 推荐标准
- ASTM C957/C957M-17(2024) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D7065-17(2024) Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
- ASTM D7731-17(2024) Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM D8028-17(2024) Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
- ASTM E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
- ASTM F2890-17(2024) Standard Guide for Hazard Awareness for Search and Rescue Personnel
- ASTM D3368-17(2022) Standard Specification for FEP Sheet and Film
- ASTM D3373-17 Standard Test Method for Vanadium in Water
- ASTM D3513-02(2018) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
- ASTM D3543-17 Standard Test Method for Metal Glide Adhesion
- ASTM D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
- ASTM D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
- ASTM D3552-17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM D3557-17 Standard Test Methods for Cadmium in Water