我的标准
购物车
400-168-0010
【国外标准】 Information Technology - FDDI Station Management-2 Common Services (SMT-2-CS)
本网站 发布时间：
2024-08-08
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
This standard specifies the common services portion of station management-2 (SMT-2-CS) for the Fibre Distributed Data Interface (FDDI). FDDI provides a high bandwidth (100 Mbit/s) general purpose interconnection among computers and peripheral equipment using optical fibre or copper twisted pair as the transmission medium in a ring configuration. FDDI can be configured to support a sustained transfer rate of approximately 80 Mbit/s (10 Mbyet/s). The use of dual attachment stations with dual MACs allows these rates to be doubled under the circumstance of a fault-free FDDI ring.
标准号：
INCITS 257-1997 (S2022)
标准名称：
Information Technology - FDDI Station Management-2 Common Services (SMT-2-CS)
英文名称：
Information Technology - FDDI Station Management-2 Common Services (SMT-2-CS)标准状态：
现行-
发布日期：
-
实施日期：
出版语种：
- 推荐标准
- AS 1613-1997 Timber - Colours for marking F-grades
- AS 1735.6(Int)-1996/Amdt 1-1997 Lifts, escalators and moving walks - Moving walks
- AS 1742.2-1994/Amdt 1-1997 Manual of uniform traffic control devices - Traffic control devices for general use
- AS 1774.24-1997 Refractories and refractory materials - Physical test methods Resistance to thermal shock
- AS 1851.6-1997 Maintenance of fire protection equipment Management procedures for maintaining the fire and smoke control features of air-handling systems
- AS 2118.3-1997 Automatic fire sprinkler systems Deluge
- AS 2157-1997 Cutback bitumen
- AS 2205.2.1-1997 Methods for destructive testing of welds in metal - Transverse butt tensile test
- AS 2205.2.2-1997 Methods for destructive testing of welds in metal - All-weld-metal tensile test
- AS 2205.3.3-1997 Methods for destructive testing of welds in metal - Longitudinal guided bend test
- AS 2205.4.1-1997 Methods for destructive testing of welds in metal - Nick-break test
- AS 2205.5.1-1997 Methods for destructive testing of welds in metal - Macro metallographic test for cross-section examination
- AS 2205.6.1-1997 Methods for destructive testing of welds in metal - Weld joint hardness test
- AS 2205.7.1-1997 Methods for destructive testing of welds in metal - Charpy V-notch impact fracture toughness test
- AS 2205.9.1-1997 Methods for destructive testing of welds in metal - Hot cracking test
