
【国外标准】 IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage (1000 V AC or lower) Inductive Test Circuits
本网站 发布时间:
2025-04-28
- IEEE C37.26-2014
- 定价: 56元 / 折扣价: 48 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide describes three methods used in the measurement of the power factor of inductive low-voltage (1000 V and lower) test circuits. These methods may be used at any frequency; however, the values in the tables are specifically for 60-Hz test circuits. These methods are as follows: a) Ratio method; b) DC decrement method; c) Phase relationship method. Table 1 lists the preferred methods to be used for different levels of test currents and for different levels of power factor. While this… read more guide is primarily intended for use on low-voltage test circuits, the methods discussed are also usable at higher voltages. read less
标准号:
IEEE C37.26-2014
标准名称:
IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage (1000 V AC or lower) Inductive Test Circuits
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE 3003.2-2014 IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems
- 下一篇: IEEE 11073-10424-2014 IEEE Standard - Health informatics--Personal health device communication - Part 10424: Device Specialization--Sleep Apnoea Breathing Therapy Equipment (SABTE)
- 推荐标准
- ASTM C1000-19 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
- ASTM C1001-19 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
- ASTM C1016-14(2022) Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
- ASTM C1022-17(2022) Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
- ASTM C1023-10(2023) Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
- ASTM C1026-23 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
- ASTM C1032-18 Standard Specification for Woven Wire Plaster Base
- ASTM C1037-16 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
- ASTM C1040/C1040M-24 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- ASTM C1045-19 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
- ASTM C1046-95(2021) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
- ASTM C1047-19 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM C1048-18 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
- ASTM C1057-22 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
- ASTM C1058/C1058M-10(2023) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation