- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- AS >>
- AS/NZS 61558.2.4:2009 Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements and tests for isolating transformers and power supply units incorporating transformers(IEC 61558-2-4 Ed 2, IDT)

【国外标准】 Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements and tests for isolating transformers and power supply units incorporating transformers(IEC 61558-2-4 Ed 2, IDT)
本网站 发布时间:
2021-03-22
- AS/NZS 61558.2.4:2009
- 现行
- 定价: 78元 / 折扣价: 67 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
暂无
标准号:
AS/NZS 61558.2.4:2009
标准名称:
Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements and tests for isolating transformers and power supply units incorporating transformers(IEC 61558-2-4 Ed 2, IDT)
英文名称:
Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements and tests for isolating transformers and power supply units incorporating transformers(IEC 61558-2-4 Ed 2, IDT)标准状态:
现行-
发布日期:
2009-10-30 -
实施日期:
出版语种:
- 其它标准
- 上一篇: AS/NZS 61558.2.4:2001 Safety of power transformers, power supply units and similar - Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997, MOD)
- 下一篇: AS/NZS 61558.2.4:2009 (IEC TEXT) Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Particular requirements and tests for isolating transformers and power supply units incorporating transformers(IEC 61558-2-4 Ed 2, IDT) (Reconfirmed 2020)
- 推荐标准
- ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM ISO/ASTM52903-2-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment
- ASTM ISO/ASTM52911-2-19 Additive manufacturing — Design — Part 2: Laser-based powder bed fusion of polymers
- ASTM ISO/ASTM52926-2-23 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB
- ASTM ISO/ASTM52926-4-23 Additive manufacturing of metals — Qualification principles — Part 4: Qualification of operators for DED-LB
- ASTM ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc
- ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
- ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
- ATS 5200.501-2009 Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point
- AS 2519-1993 (R2013) Guide to the technical evaluation of higher rank coal deposits
- AS 2527-1997 Cylinders for dissolved acetylene
- AS 2533-1982 Acoustics - Preferred frequencies for measurements
- AS 2542.1.2-1984 Sensory analysis of foods General guide to methodology - Types and choice of test
- AS 2542.1.3-1995 Sensory analysis of foods General guide to methodology - Selection of assessors
- AS 2542.2.1-1982 Sensory analysis of foods Specific methods - Paired comparison test