
【国外标准】 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Transport Incubators (Adopted IEC 601-2-20:1990)
本网站 发布时间:
- CAN/CSA-C22.2 NO. 601.2.20-92(R2001)
- 现行
- 定价: 455元 / 折扣价: 387 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1.1 Scope
This Particular Standard specifies requirements for the safety of
TRANSPORT INCUBATORS as defined in Sub-clause 2.1.101, hereinafter referred to as EQUIPMENT and designed to be installed and used in accordance with the Rules of the Canadian
标准号:
CAN/CSA-C22.2 NO. 601.2.20-92(R2001)
标准名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Transport Incubators (Adopted IEC 601-2-20:1990)
英文名称:
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Transport Incubators (Adopted IEC 601-2-20:1990)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-C22.2 NO. 601.2.19A-92 (R01) Amendment 1:2001 to CAN/CSA-C22.2 NO. 601.2.19-92, Medical Electrical Equipment - Part 2: Particular Requirements for Safety of Baby Incubators (Adopted Amendment 1:1996 to IEC 601-2-19:1990)
- 下一篇: CAN/CSA-C22.2 NO. 601.2.20A-92 (R01) Amendment 1:2001 to CAN/CSA-C22.2 NO. 601.2.20-92, Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Transport Incubators (Adopted Amendment 1:1996 to IEC 601-2-20:1990)
- 推荐标准
- ASTM C1134-23 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
- ASTM C1136-23 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
- ASTM C1138M-19 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- ASTM C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM C1152/C1152M-20 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
- ASTM C1153-23 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
- ASTM C1156-18 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
- ASTM C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement
- ASTM C1161-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1165-23 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
- ASTM C1168-23 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
- ASTM C117-23 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
- ASTM C1173-22 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
- ASTM C1174-20 Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste