【国外标准】 Standard Guide for Body Armor for Non-Law Enforcement First Responders
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 This guide is intended for non-law enforcement first responders facing increased exposure to scenes of violence where firearms or stabbing weapons may be used.4.2 The use and wear conditions are different than for law enforcement, requiring specialized guidance on types of body armor and their limitations, levels of protection, threat assessment, use and care, compatibility with other required protective gear, and training.1.1 This guide provides information to non-law enforcement first responders for the selection and use of body armor.1.2 Non-law enforcement first responders, including but not limited to fire fighters, emergency medical service providers, fire investigators, and civilian/community response teams, require specialized guidance on types of body armor and their limitations, levels of protection, threat assessment, use and care, compatibility with other required protective gear, and training.1.3 This guide is directed to authorities having jurisdiction (AHJs) and all non-law enforcement first responders and their agency or department leadership.1.4 This guide is not intended for law enforcement and corrections personnel.NOTE 1: See NIJ SAG 0101.06.1.5 This guide is divided into the following sections: Section Title1 2 Referenced Documents3 Terminology4 5 Managing a Body Armor Program6 Understanding Protection Levels7 Selecting the Appropriate Body Armor8 Sizing Body Armor to the End User(s)9 Guidance on Purchasing10 Verifying that Your Body Armor is NIJ Certified11 Fit, Coverage, and Wear Guidance12 Fire Fighter Guidance for Body Armor Use with Turnout Gear13 Inspection, Care, and Maintenance14 KeywordsAnnex A1 Risk Assessment GuidanceAppendix X1 Body Armor Program Management GuidanceAppendix X2 Comparison of NIJ Ballistic Protection LevelsAppendix X3 General Federal Government Grant Programs 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.6.1 The user of this standard will identify the system of units to be used, and it is critical to ensure that any cross-referenced standards maintain consistency of units between standards.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E3348/E3348M-22
标准名称:
Standard Guide for Body Armor for Non-Law Enforcement First Responders
英文名称:
Standard Guide for Body Armor for Non-Law Enforcement First Responders标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard