
【国外标准】 IEEE Guide for the Design and Installation of Cable Systems in Substations
本网站 发布时间:
2025-06-05
- IEEE 525-2025
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This document is a guide for the design, installation, and protection of insulated wire and cable systems in substations with the objective of helping to minimize cable failures and their consequences. Cable systems with voltages greater than 35 kV are not covered in this guide.
标准号:
IEEE 525-2025
标准名称:
IEEE Guide for the Design and Installation of Cable Systems in Substations
英文名称:
IEEE Guide for the Design and Installation of Cable Systems in Substations标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM B215-20(2025) Standard Practices for Sampling Metal Powders
- ASTM B824-17(2025) Standard Specification for General Requirements for Copper Alloy Castings
- ASTM C1244/C1244M-20(2025) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM C1275-18(2025) Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
- ASTM C1337-17(2025) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
- ASTM C1358-18(2025) Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
- ASTM C1360-17(2025) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM C1361-10(2025) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
- ASTM C1496-18(2025) Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
- ASTM C14M-20(2025) Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
- ASTM C1862-17(2025) Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
- ASTM C502-16(2025) Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
- ASTM C505M-19(2025) Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
- ASTM C654-19(2025) Standard Specification for Porous Concrete Pipe
- ASTM C654M-19(2025) Standard Specification for Porous Concrete Pipe (Metric)