- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ANSI >>
- INCITS/ISO TS 19130-2:2014 (R2025) Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar, a Technical Specification prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/TS 19130-2:2014)
【国外标准】 Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar, a Technical Specification prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/TS 19130-2:2014)
本网站 发布时间:
2026-04-14
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
Supports exploitation of remotely sensed images. It specifies the sensor models and metadata for geopositioning images remotely sensed by Synthetic Aperture Radar (SAR), Interferometric Synthetic Aperture Radar (InSAR), LIght Detection And Ranging (lidar), and SOund Navigation And Ranging (sonar) sensors. The specification also defines the metadata needed for the aerial triangulation of airborne and spaceborne images.
标准号:
INCITS/ISO TS 19130-2:2014 (R2025)
标准名称:
Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar, a Technical Specification prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/TS 19130-2:2014)
英文名称:
Geographic information -- Imagery sensor models for geopositioning -- Part 2: SAR, InSAR, lidar and sonar, a Technical Specification prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/TS 19130-2:2014)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO TS 19159-1:2014 (R2025) Geographic information -- Calibration and validation of remote sensing imagery sensors and data -- Part 1: Optical sensors, a Technical Report prepared by INCITS and registered with ANSI (Identical National Adoption of ISO/TS 19159-1:2014)
- 下一篇: INCITS 556-2020 (R2025) Fibre Channel Non-Volatile Memory Express - 2 (FC-NVMe - 2)
- 推荐标准
- ASTM D6364-06(2025) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- AS 2783-1992/Amdt 2-1994 Use of reinforced concrete for small swimming pools
- AS 2796.2-1999 Timber - Hardwood - Sawn and milled products Grade description
- AS 2805.12.2-1999 Electronic funds transfer - Requirements for interfaces Message content - Codes
- AS 2805.14.2-2003 Electronic funds transfer - Requirements for interfaces Secure cryptographic devices (retail) - Security compliance checklists for devices used in magnetic stripe card systems
- AS 2805.2-1997 Electronic funds transfer - Requirements for interfaces Message structure, format and content
- AS 2805.2-2000/Amdt 1-2002 Electronic funds transfer - Requirements for interfaces Message structure, format and content
- AS 2805.4.1-2001 (R2016)/Amdt 1-2006 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanism using a block cipher
- AS 2805.4.2-2001 Electronic funds transfer - Requirements for interfaces Message authentication - Mechanisms using a hash-function
- AS 2805.5.2-2009 Electronic funds transfer - Requirements for interfaces Ciphers - Modes of operation for an n-bit block cipher
- AS 2805.6.1.1-2009 (R2019)/Amdt 1-2011 Electronic funds transfer - Requirements for interfaces Key management - Principles
- AS 2805.6.1.2-2009 Electronic funds transfer - Requirements for interfaces Key management - Symmetric ciphers, their key management and life cycle
- AS 2805.6.2-1988 Electronic funds transfer - Requirements for interfaces Key management - Transaction keys
- AS 2806.1-2003 (R2013) Aluminium ores - Sampling Sampling procedures

我的标准
购物车
400-168-0010








