
【国外标准】 Identification cards - Recording technique - Part 8: Magnetic stripe - Coercivity of 51,7 kA/m (650 Oe)
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Defines the characteristics for identification cards as defined in Clause 4 of this part of ISO/IEC 7811, and the use of such cards for international interchange. This part of ISO/IEC 7811 specifies requirements for a 51,7 kA/m (650 Oe) magnetic stripe (including any protective overlay) on an identification card. The encoding technique and coded character sets are not defined, however, the specifications of ISO/IEC 7811-2 may be used. It takes into consideration both human and machine aspects and states minimum requirements.
标准号:
INCITS/ISO/IEC 7811-8:2014 (R2021)
标准名称:
Identification cards - Recording technique - Part 8: Magnetic stripe - Coercivity of 51,7 kA/m (650 Oe)
英文名称:
Identification cards - Recording technique - Part 8: Magnetic stripe - Coercivity of 51,7 kA/m (650 Oe)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6574/D6574M-13(2021) Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
- ASTM D6596-00(2021) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
- ASTM D6656-16(2021) Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
- ASTM D6657-16(2021) Standard Test Method for pH of Wet Blue and Wet White
- ASTM D6659-16(2021) Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests
- ASTM D6706-01(2021) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
- ASTM D6801-07(2021) Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
- ASTM D6901-15(2021) Standard Specification for Artists' Colored Pencils
- ASTM D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D7004/D7004M-03(2021) Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
- ASTM D7076-10(2021)e1 Standard Test Method for Measurement of Shives in Retted Flax
- ASTM D7111-16(2021) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM D7116-16(2021) Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
- ASTM D7142-05(2021) Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
- ASTM D7154-15(2021)e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)