【国外标准】 Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)
本网站 发布时间:
2024-02-28
- ASTM E577-85(2002)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
This guide covers the application of dimensional coordination in building design and the fabrication of rectilinear building parts and systems. A minimum number of preferred dimensions are recommended to give a range of alternatives that should result in economies in design, detailing, production, and construction. Dimensional coordination should be used where benefits in documentation, fabrication, installation, and maintenance can be established, but is not intended to eliminate uncoordinated custom design. Dimensional coordination of buildings and rectilinear building parts is based on the application of three related concepts such as modular reference grids of lines or planes to define reference locations in space, controlling dimensions in the horizontal and vertical plane as means of controlling the location of major building elements and rectilinear building parts, and coordinating dimensions for building components to reduce variety of sizes and to promote a better fit within the controlling reference system therefore minimizing wasteful cutting or fitting on site. The reference system for dimensionally coordinated design may consist of: a standard modular grid of dimensions; a multimodular grid of two or three dimensions, which may use different modules in different directions; or, a selected set of reference planes or lines spaced at modular intervals but without the use of a regular grid. The reference system is used in design and detailing decisions to locate building parts that may or may not be shown on working drawings.1.1 This guide covers the application of dimensional coordination in building design and the fabrication of rectilinear building parts and systems. A minimum number of preferred dimensions are recommended to give a range of alternatives that should result in economies in design, detailing, production, and construction. Dimensional coordination should be used where benefits in documentation, fabrication, installation, and maintenance can be established, but is not intended to eliminate uncoordinated custom design.1.2 Specifically, the guide covers:1.2.1 Descriptions of terms used in dimensional coordination.1.2.2 The basis for the dimensional coordination of building parts and systems in the design of buildings.1.2.3 Preferred horizontal and vertical dimensions for building parts and for the coordination of systems.1.3 This guide does not state preferred dimensions and sizes for building components, except for general principles.1.4 Basic guidelines for dimensioning in modular drawing practice are given.1.5 Where practicable, recommendations in international standards prepared by the International Organization for Standardization (ISO) have been taken into account.
标准号:
ASTM E577-85(2002)
标准名称:
Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)
英文名称:
Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard