
【国外标准】 Standard Guide for Swiftwater/Flood Search and Rescue Operations
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guide establishes a framework within which swiftwater/flood SAR operations shall be conducted.4.2 Every person, agency, and organization that responds to, or participates in, swiftwater/flood SAR operations should operate within the framework established by this guide.4.3 This guide and the framework it establishes should be used in conjunction with established and authorized guidelines and procedures mandated by an AHJ.4.4 The AHJ shall determine which personnel, agencies, and/or organizations are qualified and authorized to participate in swiftwater/flood SAR operations.4.5 This guide is to be used by individuals and AHJ that wish to perform swiftwater/flood SAR operations as part of the NIMS/ICS.4.6 This guide does not stand alone and must be used with the referenced documents to safely and effectively perform swiftwater/flood SAR operations.4.7 The AHJ will determine the evaluation process to assess the extent to which the requirements of this standard are met.4.8 Because operations in the swiftwater/flood environment are inherently dangerous, and individuals involved are frequently required to perform rigorous activities in adverse conditions, regional and national safety standards should be included in agency policies and procedures.4.9 Swiftwater/flood personnel should only perform activities in the swiftwater environment after a thorough risk assessment and appropriate risk mitigation efforts (for example, use of personal protective equipment (PPE), restricting efforts to shore-based techniques, delaying a recovery until more favorable water conditions exist, etc.) have been performed, or at the very least, should follow the appropriate federal, state, tribal, provincial, and local safety standards as they apply to activities in swiftwater environments.1.1 This guide establishes a framework within which swiftwater/flood Search and Rescue (SAR) operations shall be conducted as part of the National Incident Management System (NIMS)/Incident Command System (ICS).1.2 The requirements of this guide shall apply to individuals, agencies, and organizations that respond to swiftwater/flood SAR operations, including those not regulated by government mandates.1.3 This document does not define the specific training required for personnel involved in swiftwater/flood SAR operations. Refer to local, state, federal, public, and private swiftwater rescue certification and operations courses that satisfy the existing authority having jurisdiction (AHJ) requirements.1.4 This guide includes references more common to the United States of America, but may be adapted for use elsewhere.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3048-13(2022)
标准名称:
Standard Guide for Swiftwater/Flood Search and Rescue Operations
英文名称:
Standard Guide for Swiftwater/Flood Search and Rescue Operations标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM F3016/F3016M-19 Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
- ASTM F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
- ASTM F302-09(2021) Standard Practice for Field Sampling of Aerospace Fluids in Containers
- ASTM F3021-17 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ASTM F3022-16e1 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
- ASTM F3023-18 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
- ASTM F3026-14(2019) Standard Guide for Helicopter Inland Search and Rescue (SAR) Crew Chief
- ASTM F3027-18 Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
- ASTM F3033-16(2021) Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes
- ASTM F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
- ASTM F3035-22 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
- ASTM F3036-21 Standard Guide for Testing Absorbable Stents
- ASTM F3038-21 Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
- ASTM F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM F3045-21 Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water