【国外标准】 Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 The purpose of this standard practice is to provide the minimum requirements for the conduct of compliance audits.4.2 The intended use of this practice is to provide a basis for an internal or external entity to develop an audit program. An audit program defines specific requirements for the execution of audits for a particular objective. An example of an audit program would be an external (third party) audit of UAS manufacturer’s quality assurance system.4.3 Compliance to this practice would ensure that audit programs and those who develop and execute them are following a consensus set of minimum requirements.4.4 This practice does not mandate either internal or external audits.4.5 An auditing entity cannot request or approve an audit.4.6 Other Audit Criteria—Other audit criteria may be included in the audit scope if specified in the audit plan. Examples include safety, technical, operational, and management requirements. Items that are outside the scope of auditable criteria may be submitted as observations for possible resolution. However, these are not binding and are not mandatory.4.7 Additional Services—Additional services are outside the scope of an audit objective. Examples of such services are consultation to resolve negative or open findings or any other service where the auditing entity conducts an activity other than an audit for the audited entity.4.8 Compliance Assurance—An audit is only an indicator of the compliance health of the facility or organization, or both, during only the period under review and therefore has limited compliance assurance and is not assumed to be exhaustive.4.9 Level of Review is Variable—The audit scope may vary to meet different audit objectives. For example, the audit scope may include only selected audit criteria, selected period under review, or selected portions of a facility or organization.1.1 This standard practice establishes the minimum set of requirements for auditing programs, methods, and systems, the responsibilities for all parties involved, and qualifications for entities conducting audits against ASTM standards on Unmanned Aircraft Systems. This document has been purposefully designed within the broader context of the Committee F38 library. Although the original source materials for the content presented here were intended to function as standalone documents, the committee has consciously removed any redundant information in favor of adopting a referential "single-source-of-truth" approach. Consequently, when applying this standard, it is essential to consider and integrate all relevant Committee F38 standards to ensure its comprehensive and accurate implementation.1.2 When intending to utilize the information provided in this document as a Means of Compliance for operational or design approval, or both, it is crucial to consult with the respective oversight authority (for example, CAA) regarding its acceptable use and application. To find out which oversight authorities have accepted this standard (in whole or in part) as an acceptable Means of Compliance to their regulatory requirements (hereinafter "the Rules"), please refer to the Committee F38 webpage (www.ASTM.org/COMMITTEE/F38.htm).1.3 This practice provides requirements to enable consistent and structured examination of objective evidence for compliance that is beneficial for the UAS industry and its consumers. It is the intent of this practice to provide the necessary minimum requirements for organizations to develop audit programs and procedures.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3365-23
标准名称:
Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
英文名称:
Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- BS EN IEC 61753-081-02:2023 Fibre optic interconnecting devices and passive components. Performance standard