
【国外标准】 American National Standard for Information Technology v Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 2
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
Changes in this document from FC-AL version 7.0
(All changes in the replacement pages that follow are marked with change bars in the margins.)
Changes in this document from FC-AL amendment (dated 23 Oct 2001)
- Changed the Transmission Word delay through an L_Port from 6 words to 12 words to accommodate higher Fibre Channel speeds; e.g., 8 and 16Gb/s.
- Corrected the OPEN state to assure fairness for an L_Port that is using the TRANSFER state while another L_Port is using ARBf.
(All changes in the replacement pages that follow are marked with change bars in the margins.)
Changes in this document from FC-AL amendment (dated 23 Oct 2001)
- Changed the Transmission Word delay through an L_Port from 6 words to 12 words to accommodate higher Fibre Channel speeds; e.g., 8 and 16Gb/s.
- Corrected the OPEN state to assure fairness for an L_Port that is using the TRANSFER state while another L_Port is using ARBf.
标准号:
INCITS 332:1999/AM 2-2006[R2011]
标准名称:
American National Standard for Information Technology v Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 2
英文名称:
American National Standard for Information Technology v Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 2标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM E1999-23 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
- ASTM E2006-22 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
- ASTM E2011-21 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand
- ASTM E2472-12(2018)e2 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
- ASTM F2011-02(2018) Standard Specification for Safety and Performance of Fun-Karts
- ASTM F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- ASTM F2819-10(2015)e2 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
- ASTM G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- ASTM E2760-19e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
- ASTM ISO/ASTM52926-2-23 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB
- ASTM ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc
- ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
- ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device