
【国外标准】 IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
本网站 发布时间:
2025-04-28
- IEEE C50.13-2014
- 定价: 110元 / 折扣价: 94 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
The requirements in this standard apply to all 50 Hz and 60 Hz, two-pole and four-pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above. Cylindrical-rotor, two-pole and four-pole generators below this rating are generally covered by NEMA MG 1.
标准号:
IEEE C50.13-2014
标准名称:
IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D5076/D5076M-13(2019) Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
- ASTM D5167-13(2018) Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
- ASTM D5266-13(2020) Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
- ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
- ASTM D5540-13(2021) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D5548-13(2020) Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
- ASTM D5646-13(2018) Standard Terminology Relating to Seams and Stitches Used in Home Sewing
- ASTM D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
- ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5822-13(2019) Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
- ASTM D5897-13(2021) Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
- ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM D6234-13(2020) Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
- ASTM D6267/D6267M-13(2022) Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
- ASTM D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics