- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- ASTM >>
- ASTM D6825-21 Standard Guide for Placement of Riprap Revetments
【国外标准】 Standard Guide for Placement of Riprap Revetments
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 Riprap is a commonly used form of scour protection and general slope protection. Riprap provides a long term solution when properly sized and installed. Riprap has structural flexibility so it will conform to irregular surfaces and adapt to minor subgrade settlement. It is often appropriate for use in conjunction with soil bioengineering (vegetation establishment) alternatives. In some environments, riprap may provide habitat for benthic organisms and fish.4.2 Revetments provide a facing or lining to armor a surface; and the layer thickness is typically minimized while providing the necessary resistance to scour. In this case, standardized practices to obtain consistent coverage having acceptable thickness tolerances and voids become important.4.3 This guide may be used by owners, installation contractors, regulatory agencies, inspection organizations, and designers and specifiers who are involved in the construction of riprap revetments. Modifications may be required for specific job conditions. This guide is not intended for construction specifications on large projects, but may be referenced where preparation of job specific construction specifications are not justified. If this practice is included by reference in contract documents, the specifier should provide a list of supplemental requirements.1.1 This guide covers methods to place riprap with associated filters for erosion control purposes. This guide does not recommend a specific course of action because of the diverse methods and procedures that are capable of producing a functional product. This guide identifies favorable riprap qualities and recommends practices best suited to obtain those qualities. The production of rock, use of recycled materials, rock with cut dimensions, and engineering and revetment design are beyond the scope of this guide. Special forms of riprap, including hand placed riprap, grouted riprap, or keyed (plated) riprap that is tamped into place to smooth the surface, are also beyond the scope of this guide.1.2 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been developed and approved through the ASTM consensus process1.3 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.1.4 This standard may involve hazardous operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D6825-21
标准名称:
Standard Guide for Placement of Riprap Revetments
英文名称:
Standard Guide for Placement of Riprap Revetments标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard