
【国外标准】 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
本网站 发布时间:
2025-04-28
- IEEE/ANSI C63.7-2015
- 定价: 81元 / 折扣价: 69 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This guide provides information on construction of radiated emission test facilities in the frequency range of 30 MHz to 40 GHz. Standardized site validation methods above 18 GHz remain unavailable at present, however the changes in this edition are considered appropriate guidance for use up to 40 GHz. In general, the construction techniques described apply either below 1 GHz, or for 1 GHz and above. This guide does not address construction code compliance issues. Parties responsible for the… read more design and construction of test sites are advised to consult with the various authorities having jurisdiction (AHJ) to determine the building, HVAC, plumbing, electrical, etc., codes and regulations that are applicable for the test site. In addition, beyond the similarity of basic principles, this guide also does not specifically address considerations on construction of test sites used for calibration of antennas used in EMC radiated emissions measurements; that topic is covered in ANSI C63.5.1,2 In addition, site-dependent measurement instrumentation and signal cabling issues are not in the scope of this guide. read less
标准号:
IEEE/ANSI C63.7-2015
标准名称:
American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM C1130-24 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1154-24 Standard Terminology for Fiber-Reinforced Cement Products
- ASTM C1227-24 Standard Specification for Precast Concrete Septic Tanks
- ASTM C1242-23c Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- ASTM C1256-25 Standard Practice for Interpreting Glass Fracture Surface Features
- ASTM C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM C1558-24 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM C1613-24 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
- ASTM C1668-24 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM C1710-24 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- ASTM C1774-24 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM C1937-24 Standard Specification for Layered, Glass Fiber Felt Pipe and Board Insulation
- ASTM C31/C31M-24a Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C390-08(2024) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots