【国外标准】 Standard Practice for Calculation of Asset Movement Velocity (AMV)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
3.1 This practice establishes a standard calculation representing the operational fluidity of assets used by an entity.3.2 It is intended that this practice foster and enable additional practices related to or based on AMV information.3.3 This practice enables effective and consistent communication and trend tracking over time regarding AMV.3.4 Calculating, recording, tracking, and comparing the computed AMV will provide comparative insight into the operational complexity of the entity. Determination of the component parts of the AMV calculation will provide information on the number of acquisition, disposition, and movement transactions and, viewed separately, will serve as a useful insight.3.5 Clarifying Comparative Example: 3.5.1 Entity A has few assets that are of a high dollar value but have been in place for many years and seldom move. These items are tracked to the site physical location level (PLL). Entity A will have an AMV near 0.0. This will be an accurate reflection of the record keeping and transactional risk associated with the management of assets within the entity.3.5.2 Entity B has over 5000 pieces of equipment that it tracks to the room PLL. As most of these items are information technology related, they typically have a useful life of a little over three years, after which they are donated to local schools. These items are moved from person to person and room to room very frequently for operational purposes. Entity B will have a high AMV, perhaps 3.0 or above. This will be an accurate reflection of the record keeping and transactional risk associated with the management of assets within the entity.1.1 This practice calculates asset movement velocity (AMV) based on the movement of assets.1.2 There is no existing, recognized practice for calculating AMV.1.3 This practice is designed to be applicable and appropriate for all asset-holding entities.1.4 This practice does not cover material inventory. Inventory velocity (or inventory turns) is extensively described and discussed in supply chain literature and is based on throughput rather than movement transactions.1.5 AMV can be calculated for the entirety of the asset inventory of the entity or any defined subset, including individual assets.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E2497-11(2017)
标准名称:
Standard Practice for Calculation of Asset Movement Velocity (AMV)
英文名称:
Standard Practice for Calculation of Asset Movement Velocity (AMV)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS ISO 24138:2024 Information and documentation. International Standard Content Code (ISCC)
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard