【国外标准】 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
3.1 Water absorptiveness through the surface of an overlaid panel is a function of various characteristics of the overlay and substrate, including overlay resin content, thickness of the overlay, porosity, and permeability.3.2 This test method is useful in comparing the water absorption characteristics of different overlaid panel products. The results from this test method are influenced by both the performance of the overlay system and the panel substrate. Therefore, the results are appropriate for comparison of the relative performance of an overlay system when tested over similar or matched panel substrates.NOTE 1: Panel attributes that may influence water absorption include, but are not limited to, panel type, wood species, face veneer thickness and grade, preoverlay surface treatment such as sanding, particle geometry and compaction ratio.1.1 This test method covers the determination of the quantity of water absorbed in a specified time through the surface of an overlaid wood-based panel. The test method measures the rate of water gain within a controlled surface area of the overlaid panel surface when exposed to standing water. The method was adapted from the principles of Test Method D5795.1.2 This test method is applicable to various overlaid wood-based panels including, but not limited to, plywood (such as MDO grades and HDO grades referenced in PS 1–09), oriented strand board, medium density fiberboard, particleboard, and hardboard.1.3 This test method does not address sampling procedures, number of replications nor performance criteria since those details vary depending upon the purpose of the testing and the type of product. The method is specific to the panel surface and does not evaluate water absorption or edge swell that may occur along panel edges. The method does not consider the variables related to in-service moisture conditions and therefore does not claim to directly relate to water absorption that may occur in actual panel use situations.1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.1.5 This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this test method to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D7433-19
标准名称:
Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
英文名称:
Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- BS ISO 24138:2024 Information and documentation. International Standard Content Code (ISCC)
- 24/30492859 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard
- BS EN IEC 61753-071-02:2020+A1:2024 Fibre optic interconnecting devices and passive components. Performance standard
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- 24/30485973 DC standard