
【国外标准】 Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges using Two-Frequency Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format
本网站 发布时间:
2024-08-08
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This part of ISO 6596 specifies the magnetic characteristics, the track layout, and a track format to be used on a 130 mm (5.25 in) flexible disk cartridge, recorded at 7 958 ftprad on one side using two-frequency recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per inch (tip)], which is intended for data interchange between data processing systems.
标准号:
INCITS/ISO/IEC 6596-2-1985 (S2022)
标准名称:
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges using Two-Frequency Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format
英文名称:
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges using Two-Frequency Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: INCITS/ISO/IEC 6523-2:1998 (R2019) Information technology -- Structure for the identification of organizations and organization parts -- Part 2: Registration of organization identification schemes
- 下一篇: INCITS/ISO/IEC 6596-2:1985[S2012] Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges using Two-Frequency Recording at 7 958 ftpard, 1,9 tpmm (48 tpi), on One Side - Part 2: Track Format (formerly ISO 6596-2:1985 [1997])
- 推荐标准
- ASTM F2046-00(2022) Standard Specification for Tachometers, Various
- ASTM F2051-00(2022) Standard Specification for Implantable Saline-Filled Breast Prostheses
- ASTM F2076-01(2022) Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
- ASTM F2092-14(2022) Standard Specification for Convection Oven Gas or Electric
- ASTM F2108-17(2022) Standard Practice for Inspection of Transparent Parts by Prism
- ASTM F2109-01(2022) Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
- ASTM F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
- ASTM F2156-17(2022) Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
- ASTM F2203-13(2022) Standard Test Method for Linear Measurement Using Precision Steel Rule
- ASTM F2218-02(2022) Standard Guide for Hardware Implementation for Computerized Systems
- ASTM F2246-06(2022) Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
- ASTM F2320-18(2022) Standard Specification for Rubber Insulating Sheeting
- ASTM F2328M-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
- ASTM F2332-06(2022) Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
- ASTM F2352-14(2022) Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft