
【国外标准】 IEEE Draft Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
本网站 发布时间:
2025-04-28
- IEEE PC57.16
- 定价: 161元 / 折扣价: 137 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This standard applies to series-connected dry-type air-core single-phase and three-phase outdoor or indoor reactors of distribution and transmission voltage class that are connected in the power system to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type air-core reactors covered by this standard are self-cooled by natural air convection. With some restrictions, this standard is applicable to filter reactors, shunt capacitor… read more reactors (used with shunt capacitor banks), and discharge current-limiting reactors (used with series capacitor banks). Annex A, Annex B, and Annex C are included to provide guidance. This standard does not apply to devices such as a) Shunt reactors (see IEEE Std C57.21(TM)-2008) b) Arc suppression coils c) Neutral grounding devices (see IEEE Std 32(TM)-1972 [B21]) d) Line resonant reactors e) High-voltage direct current (HVDC) smoothing reactors (IEEE Std 1277(TM)-2010 [B23]) f) Forced cooled reactors g) Line traps and radio interference (RI) filter reactors (ANSI C93.3-1995) read less
标准号:
IEEE PC57.16
标准名称:
IEEE Draft Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
英文名称:
标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
- ASTM D7600-16(2024) Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
- AS 2362.16-1990 Automatic fire detection and alarm systems - Methods of test for actuating devices Impact test
- AS 2550.16-1997 Cranes- Safe use Mast climbing work platforms
- AS 3730.16-1991 Guide to the properties of paints for buildings Latex - Timber finish - Exterior
- AS 4459.16-2005 Methods of sampling and testing ceramic tiles Determination of small colour differences (ISO 10545-16:1999 MOD)
- AS/NZS 2350.16:2006 (R2016)/Amdt 1:2008 Methods of testing portland, blended and masonry cements Determination of air content of masonry cement
- AS/NZS 3350.2.16:1996/Amdt 3:2007 Safety of household and similar electrical appliances Particular requirements - Food waste disposers (IEC 60335-2-15:1994, MOD)
- AS/NZS 3580.16:2014 Methods for sampling and analysis of ambient air Determination of polycyclic aromatic hydrocarbons (PAH)
- ASTM D3394-16(2022) Standard Test Methods for Sampling and Testing Electrical Insulating Board
- ASTM D3410/D3410M-16(2024) Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
- ASTM D3511/D3511M-16(2022) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D3514/D3514M-16(2020) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
- ASTM D3529-16(2021) Standard Test Methods for Constituent Content of Composite Prepreg
- ASTM D3531/D3531M-16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg