【国外标准】 IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities
本网站 发布时间:
2025-10-27
- IEEE 383-2023
- 定价:
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
适用范围:
This standard provides general requirements and methods for qualifying electric cables, and splices for nuclear facilities. Cable, and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEEE/IEC Std 60780-323™:2016. However, this standard’s requirements may be applied to the cable and splices within these devices. For qualification of fiber optic cable refer to IEEE Std 1682™-2011.
标准号:
IEEE 383-2023
标准名称:
IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities
英文名称:
IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities标准状态:
-
发布日期:
-
实施日期:
出版语种:
- 其它标准
- 上一篇: IEEE C57.12.24-2023 IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 600 V and Below
- 下一篇: IEEE C37.98-2023 IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities
- 推荐标准
- AS/NZS 2023:1995 Baths for ablutionary purposes
- ASTM A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
- ASTM A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
- ASTM A1071/A1071M-11(2023) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1095-15(2023) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
- ASTM A126-04(2023) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM A387/A387M-17a(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM A435/A435M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
- ASTM A474-03(2023) Standard Specification for Aluminum-Coated Steel Wire Strand
- ASTM A517/A517M-17(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
- ASTM A532/A532M-10(2023) Standard Specification for Abrasion-Resistant Cast Irons
- ASTM A571/A571M-01(2023)e1 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
- ASTM A577/A577M-17(2023) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
- ASTM A578/A578M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

我的标准
购物车
400-168-0010








