
【国外标准】 Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss (Withdrawn 2015)
本网站 发布时间:
2024-02-28
- ASTM E2674-09
- Withdrawn, Replaced
- 定价: 0元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
This practice establishes a standard impact assessment methodology to enable entities to uniformly ascertain and communicate impact levels associated with the potential loss of MDSDs. This practice is not intended to prescribe specific information security policies for entities or organizations. This practice assumes that individuals and entities are following all relevant information security policies as required by federal or state law, the terms of applicable government contracts, specific agency policies such as the National Industrial Security Program Operating Manual (NISPOM), and entity-specific policies.This practice assumes, but does not require, that entities have devised and are maintaining a system of internal controls over MDSDs in accordance with the section on Management of Property of Practice E 2279.This practice assumes, but does not require, that the results of this impact assessment will inform future actions and help entities determine cost-effective property control measures for MDSDs commensurate with the potential consequences of their loss in accordance with the section on Management of Property of Practice E 2279.This practice encourages an inclusive understanding and communication of the risk associated with MDSDs and, by assigning a rating to the impact of loss, enables comparisons on this basis to other MDSDs rated using the same practice.This practice is intended to foster and enable additional standard practices related to or based on these terms and concepts.1.1 This practice describes a methodology for assessing and quantifying the impact of the loss of mobile data storage devices (MDSDs), for example, thumb drives, auxiliary hard drives, and other property containing personally identifiable information or other entity sensitive information.1.2 This practice is based on two concepts:1.2.1 Identifying the MDSDs that pose the greatest risk to the organization based on both the information that is stored on them and the location in which they are used, and1.2.2 Determining the impact of the potential loss of specific MDSDs. In general, this impact assessment is best practiced as a part of a larger risk management process. While this practice does not address this larger topic, it may inform other risk management standards.1.3 This practice is intended to be applicable and appropriate for all asset-holding entities.1.4 In accordance with the provisions of Practice E 2279, this practice clarifies and enables effective and efficient control and tracking of equipment.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E2674-09
标准名称:
Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss (Withdrawn 2015)
英文名称:
Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss (Withdrawn 2015)标准状态:
Withdrawn, Replaced-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D7379/D7379M-08(2021) Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
- ASTM D7381-07(2021)e1 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
- ASTM D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
- ASTM D7385-21 Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion
- ASTM D7387-20 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
- ASTM D7390-18e1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
- ASTM D7391-20 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
- ASTM D7392-20 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
- ASTM D7395-18(2023) Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- ASTM D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- ASTM D7398-23 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
- ASTM D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing
- ASTM D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts
- ASTM D7403-19 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation