【国外标准】 Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)
本网站 发布时间:
2024-02-28
- ASTM E1809-01
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
Measurements made by this test method are related to the night time brightness of retroreflective marking materials approximately facing the driver of a mid-sized automobile equipped with tungsten filament headlights at about 200 m distance.Retroreflective marking material used for pedestrian safety can degrade with time, exposure to sunlight, wear and cleaning, and the material requires periodic measurement to ensure that the performance of the retroreflective material provides adequate safety to the wearer.This test method is not intended to be used for the measurement of retroreflective marking material for pedestrian safety at observation and entrance angles other than those specified herein.5.3.1 For most materials, the values for the coefficient of retroreflection obtained at −4° entrance angle and 0.2° observation angle using this test method will be nearly the same as the values corresponding to +5° entrance angle and 0.2° observation angle, a geometry that is specified in some high-visibility clothing standards.1.1 This test method covers the measurement of the retroreflective properties of high visibility pedestrian garments, such as vests, using a portable retroreflectometer that can be used in the field. The portable retroreflectometer is a hand-held instrument with a defined standard geometry that can be placed in contact with retroreflective marking material to measure the retroreflection. The measurements can be compared to minimum requirements to determine the need for replacement of the retroreflective material.1.2 This test method is designed for measuring retroreflective marking materials that have an area equal to or greater than that of the aperture of the retroreflectometer.1.3 This test method is intended to be used for field measurement of retroreflective marking materials, but may be used to measure the performance of materials before placing the clothing in use.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM E1809-01
标准名称:
Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)
英文名称:
Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard