
【国外标准】 Standard Practice for Detailed Clinical Observations of Test Animals
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
3.1 This practice pertains to all forms of toxicological testing (acute, subchronic, or chronic) performed by any route of administration (inhalation, oral, dermal, ocular, or other).3.2 The U.S. Environmental Protection Agency, Good Laboratory Practices for Nonclinical Laboratory Studies, as listed in 40 CFR, requires that a testing facility maintain specific standard operating procedures (SOPs) including an SOP covering clinical observations in test animals.3.3 This practice serves as a basis for consistency in clinical observations and is not meant to serve as a comprehensive list of observations that may be observed. Actual procedures and forms to be used in recording observations must be described in individual study protocols.1.1 This practice describes the terms used in observing and recording cutaneous, gastrointestinal, respiratory, reproductive, neuromuscular, ocular, and general clinical signs of animals undergoing toxicological testing. This practice also assists in properly observing and assessing laboratory animals for signs of disease or adverse effects of compound administration.1.2 This practice includes codes and descriptions for a wide variety of clinical signs, anatomical locations, and other descriptive qualifiers, and a technique for scoring the extent or severity of clinical signs.1.3 This practice assumes that the reader is knowledgeable in animal toxicology and related pertinent areas and is trained in making clinical observations.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM E2045-22
标准名称:
Standard Practice for Detailed Clinical Observations of Test Animals
英文名称:
Standard Practice for Detailed Clinical Observations of Test Animals标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D7379/D7379M-08(2021) Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
- ASTM D7381-07(2021)e1 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
- ASTM D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
- ASTM D7385-21 Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion
- ASTM D7387-20 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
- ASTM D7390-18e1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
- ASTM D7391-20 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
- ASTM D7392-20 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
- ASTM D7395-18(2023) Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- ASTM D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- ASTM D7398-23 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
- ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
- ASTM D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing
- ASTM D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts
- ASTM D7403-19 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation