我的标准
购物车
400-168-0010
- 您的位置：
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国外标准 >>
- DIN >>
- DIN IEC 61755-3-6/A1 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 86B/2898/CD:2009)
【国外标准】 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 86B/2898/CD:2009)
本网站 发布时间：
2025-10-27
开通会员免费在线看70000余条国内标准，赠送文本下载次数，单本最低仅合13.3元！还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权！
查看详情>>
标准简介适用范围：
暂无
标准号：
DIN IEC 61755-3-6/A1
标准名称：
Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 86B/2898/CD:2009)
英文名称：
标准状态：
废止-
发布日期：
2001-10-01 -
实施日期：
出版语种：
英语
- 其它标准
- 上一篇： DIN IEC 61300-3-33 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force (IEC 86B/2880/CD:2009)
- 下一篇： DIN IEC 62137-3 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints (IEC 91/876/CD:2009)
- 推荐标准
- ASTM A6/A6M-24a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM C1702-23e1 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
- ASTM D2555-17a(2024)e1 Standard Practice for Establishing Clear Wood Strength Values
- ASTM D4439-24e1 Standard Terminology for Geosynthetics
- ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
- ASTM F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- AS 1617.2-1993/Amdt 1-1994 Refractory bricks and shapes - Insulating
- AS 1617.3-1993 Refractory bricks and shapes High alumina
- AS 1617.5-1993/Amdt 1-1994 Refractory bricks and shapes - Magnesite, chrome
- AS 1628-1994/Amdt 1-1996 Water supply - Copper alloy gate, globe and non-return valves
- AS 1628-1999 (R2015)/Amdt 1-2001 Water supply - Metallic gate, globe and non-return valves
- AS 1629P-1979/Amdt 1-1994 Scorched particle standards for dry milk
- AS 1635.3.1-1993 Methods of test for pressure-sensitive adhesive tape - Adhesion strength
- AS 1635.3.5-1995 Methods of test for pressure-sensitive adhesive tape - Adhesion strength after water immersion
- AS 1635.3.6-1993/Amdt 2-1995 Methods of test for pressure-sensitive adhesive tape - Adhesion strength to own backing
