
【国外标准】 Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 Aircraft flying in national airspace are required by the ICAO Chicago Convention and national regulatory rules to have visible markings to determine nationality and registration. UAS shall comply with these rules, although small UAS will have unique rules or exemptions from existing rules due to their small size. This standard is designed to allow UAS to comply with these marking requirements in Annex 7 to the Convention on International Civil Aviation as amended by state regulatory rules.4.2 Many ICAO states are assigning UAS to different classes and categories to define the rules UAS must operate under. The ICAO Annex 7 Standards and Recommended Practices (SARPS) apply to UAS Aircraft with the exception of small UAS. The classification of what constitutes a small UAS (sUAS) has been left to ICAO states and the rules under which sUAS operate are dictated by each state.4.3 This practice follows ICAO Annex 7 SARPS except in areas where the unique aspects of UAS may not allow compliance. In these cases, this document will address the issue and recommend the need for an alternate compliance method.1.1 This practice prescribes guidelines for the display of marks to indicate appropriate UAS registration and ownership for all Unmanned Aircraft Systems (UAS) except those categorized as small UAS (sUAS) by regulatory authorities. The FAA is developing a Special Federal Aviation Regulation (SFAR) to define the term small UAS and provide regulations for these aircraft.1.2 This practice will allow determination of nationality in cases where UAS may cross international boundaries.1.3 This practice does not apply to sUAS. The International Civil Aviation Organization (ICAO) has left the designation of sUAS to each state and the states will develop rules and regulations for sUAS.1.4 This practice does not apply to model aircraft.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F2851-10(2018)
标准名称:
Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
英文名称:
Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- AS 2550.10-1994 Cranes - Safe use Elevating work platforms
- AS 2550.10-2006/Amdt 1-2009 Cranes, hoists and winches - Safe use Mobile elevating work platforms
- AS 2701.10-1984 Methods of sampling and testing mortar for masonry construction Methods for chemical analysis of mortars
- AS 2805.10-1997 Electronic funds transfer - Requirements for interfaces File transfer integrity validation
- AS 2891.10-1991 Methods of sampling and testing asphalt Water and volatile oils content
- AS 2891.10-2005 Methods of sampling and testing asphalt Water and volatile oils content
- AS 3580.10.1-1991 Methods for sampling and analysis of ambient air Determination of particulates - Deposited matter - Gravimetric method
- AS 3580.10.1-1991/Amdt 2-1993 Methods for sampling and analysis of ambient air - Determination of particulates - Deposited matter - Gravimetric method
- AS 3706.10.1-1991 Geotextiles - Methods of test Determination of transmissivity - Radial method
- AS 3730.10-1992 Guide to the properties of paints for buildings Latex - Exterior - Gloss
- AS 3778.4.10-1991 (R2009) Measurement of water flow in open channels Measurement using flow gauging structures - End-depth method for estimation of flow in rectangular channels with a free overfall
- AS 3789.10-2000 Textiles for health care facilities and institutions Blankets - Cotton woven cellular blankets
- AS 3818.10-2010 Timber - Heavy structural products - Visually graded Building poles
- AS 4629-2005 (R2018)/Amdt 1-2007 Automatic shut off valves and vent valves
- AS 5013.10-2004/Amdt 1-2005 Food microbiology Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp.