【国外标准】 Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler (Withdrawn 2020)
本网站 发布时间:
2024-02-28
- ASTM D4134-82(2012)
- Withdrawn, No replacement
- 定价: 0元 / 折扣价: 0 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 The advantages of the Clarke-Bumpus plankton sampler are as follows:4.1.1 It will sample a discrete depth or multiple depths, depending upon the sampling design.4.1.2 It is a slow to medium speed sampler requiring a towing speed of 3 to 5 knots.4.1.3 The sample size can be easily controlled.4.1.4 The sampler is light-weight and can be used without auxiliary equipment.4.1.5 It has a relatively high filtration efficiency factor of 0.88.4.1.6 It is a versatile sampler and can be used in all but the shallowest waters.4.1.7 The flowmeter records the amount of water that passes into the net.4.1.8 Overspill of water at the mouth of the net due to excess speed of towing is of minimal consequence.4.2 The disadvantages of the Clarke-Bumpus plankton sampler are as follows:4.2.1 The flowmeter requires frequent maintenance including calibration and lubrication.4.2.2 It is not suitable for use in very small areas or shallow waters.4.2.3 Because of the use of a net as a filtration material, the sample is semiquantitative.4.3 There are several special considerations that shall be observed when using a Clarke-Bumpus sampler. They are as follows:4.3.1 The flowmeter should be calibrated and serviced frequently to ensure efficient and accurate operation.4.3.2 The sampler is relatively fragile, particularly the closing device and flowmeter. This necessitates careful deployment and recovery procedures.4.3.3 Following each collection, the net must be thoroughly washed.4.3.4 Special attention must be given to the strength of the cable and its attachment to avoid loss of the sampler.4.3.5 The sampler should not be used in beds of macrophytes, in waters containing submerged objects, or close to the bottom.4.3.6 The net should be inspected frequently for pin-size holes, tears, net deterioration, and other anomalies.4.3.7 Following use, the wet net should be suspended full length in air and in subdued light and allowed to dry.1.1 This practice covers the procedures for obtaining semiquantitative samples of a phytoplankton community by use of a Clarke-Bumpus plankton sampler.1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
标准号:
ASTM D4134-82(2012)
标准名称:
Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler (Withdrawn 2020)
英文名称:
Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler (Withdrawn 2020)标准状态:
Withdrawn, No replacement-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard