
【国外标准】 Luminaires - Part 2: Particular Requirements - Section 18: Luminaires for Swimming Pools and Similar Applications (Adopted IEC 598-2-18:1993, second edition, with Canadian deviations)
本网站 发布时间:
- CAN/CSA-E598-2-18-98 (R2002)
- 现行
- 定价: 637元 / 折扣价: 542 元
- 在线阅读
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
1. Scope
This section of Part 2 of IEC 598 specifies requirements for fixed
luminaires intended for use in water, or in contact with water, in, for example, the basins of swimming pools, fountains, paddling pools, and garden pools, and for use with tun
标准号:
CAN/CSA-E598-2-18-98 (R2002)
标准名称:
Luminaires - Part 2: Particular Requirements - Section 18: Luminaires for Swimming Pools and Similar Applications (Adopted IEC 598-2-18:1993, second edition, with Canadian deviations)
英文名称:
Luminaires - Part 2: Particular Requirements - Section 18: Luminaires for Swimming Pools and Similar Applications (Adopted IEC 598-2-18:1993, second edition, with Canadian deviations)标准状态:
现行-
发布日期:
-
实施日期:
出版语种:
英文
- 其它标准
- 上一篇: CAN/CSA-E598-2-17-98 (R2002) Luminaires - Part 2: Particular Requirements - Section 17: Luminaires for Stage Lighting, Television and Film Studios (Outdoor and Indoor) (Adopted IEC 598-2-17:1984, first edition, including Amendment 1:1987 and Amendment 2:1990, with Canadian deviations
- 下一篇: CAN/CSA-E598-2-19-98 (R2002) Luminaires - Part 2: Particular Requirements - Section 19: Air-Handling Luminaires (Safety Requirements) (Adopted IEC 598-2-19:1981, first edition, including Amendment 1:1987, with Canadian deviations)
- 推荐标准
- ASTM D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
- ASTM D6520-18 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
- ASTM D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D6534-18 Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
- ASTM D6535/D6535M-18 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
- ASTM D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
- ASTM D6570-18a(2023)e1 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- ASTM D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D6647-18 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
- ASTM D6647-18(2024) Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
- ASTM D6654-18 Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
- ASTM D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time