【国外标准】 Standard Practice for Evaluation of Attached Upholstery Fabrics
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>
标准简介
适用范围:
4.1 This practice may be used to evaluate pertinent performance characteristics of attached upholstery fabrics.4.2 Loose cushions or pillows considered an inherent part of the total upholstered furniture unit are to be evaluated using this practice.4.3 This practice is not intended for use with outdoor furniture nor with slipcovers or throws.4.4 Evaluation is to be done both before and after the refurbishing procedures, as directed in voluntary care labeling instructions or as agreed upon between purchaser and supplier.4.5 The specified cleaning and maintenance procedures herein discussed do not reflect professional care designed to enhance the performance of furniture coverings, such as the application of soil and stain protectants. Reflected in this practice are the minimum capabilities of current cleaning methods used in accordance with any voluntary care labeling instructions accompanying the furniture.4.6 The characteristics to be evaluated and the acceptance criteria assigned to these areas shall be set by mutual agreement between purchaser and supplier.4.7 The significance and use of specific properties are discussed in the appropriate test methods and performance standards.1.1 This practice is to be used to evaluate specific characteristics of importance in the performance of upholstery fabric attached to a furniture unit, including woven, knitted, tufted, flocked, or vinyl fabrics.1.2 It is understood that the fabric used to construct the upholstered furniture unit should be evaluated initially using appropriate fabric performance standards, such as Specifications D3597 and D3690.1.3 Loose cushions or pillows considered an inherent part of the total furniture unit are to be evaluated using this practice.1.4 This practice is not to be used to evaluate slipcovers or throws used as furniture coverings. Outdoor furniture coverings are not to be evaluated using this practice.1.5 This practice shall not be construed to be a standard of performance but only as a standard practice for evaluation of attached upholstery fabrics.1.6 This practice may be used by mutual agreement between purchaser and supplier to establish purchasing specifications.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM D4852-18
标准名称:
Standard Practice for Evaluation of Attached Upholstery Fabrics
英文名称:
Standard Practice for Evaluation of Attached Upholstery Fabrics标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- 国家标准计划
- 24/30491443 DC standard
- 24/30489392 DC BS EN IEC 62358 Ferrite cores. Standard inductance factor for gapped cores and its tolerance
- BS ISO 19848:2024 - TC Tracked Changes. Ships and marine technology. Standard data for shipboard machinery and equipment
- BS ISO 19848:2024 Ships and marine technology. Standard data for shipboard machinery and equipment
- 24/30487130 DC BS EN 50566:2017/A2:2024 Product standard to demonstrate the compliance of wireless communication
- BS IEC 61360-7:2024 Standard data element types with associated classification scheme
- 24/30486472 DC - Product standard
- KS M ISO 4259-4 석유 및 관련 제품 — 측정 방법과 결과의 정밀도 — 제4부: 개별 실험실에서 표준 시험방법의 실행에 대한 ‘통계적 관리’ 상태를 확인하기 위한 통계적 관리도의 사용
- KS C IEC 61340-4-7 정전기학 — 제4-7부: 구체적 적용 분야에 대한 표준 시험방법 — 이온화
- KS C IEC 61340-4-8 정전기학 — 제4-8부: 구체적 적용 분야에 대한 표준 시험방법 — ESD 차폐성 — 봉투
- KS C IEC 61340-4-6 정전기학 — 제4-6부: 구체적 적용 분야에 대한 표준 시험방법 — 손목접지대
- 24/30485973 DC standard
- BS EN 14662-1:2023 - TC Tracked Changes. Ambient air quality. Standard method for measurement of benzene concentrations
- KS C IEC 61837-2 주파수 제어 및 선택을 위한 표면 실장형 압전 장치 — 표준 아웃라인 및 단자 리드 연결 — 제2부: 세라믹 함체
- 24/30485462 DC BS EN IEC 61753-1 Fibre optic interconnecting devices and passive components - Performance standard