
【国外标准】 Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
本网站 发布时间:
2024-02-28
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

适用范围:
4.1 This guide establishes test conditions that will provide a measured oil recovery rate and efficiency for a skimmer operating in drift ice.4.2 End users need a procedure to quantify optimum performance data for planning and selection of equipment.4.3 The procedure in this guide will assist in verifying and accurately reporting skimmer system performance.4.4 Tests will be conducted under well documented conditions and provide repeatable results. Other detailed testing and collection of skimmer performance data are covered under existing standards (see Guide F631 and Test Method F2709).1.1 This guide defines a procedure and measurement criteria to quantify the recovery rate and efficiency of a stationary skimmer system in drift ice conditions.1.2 The suggested procedure and test parameters are intended to provide conditions typical of relatively sparse drift ice and relatively dense drift ice coverage.1.3 It is accepted that the recovery rate as determined by this guide will not likely be achievable under actual conditions of a spill. The procedure in this guide does not account for such issues as changing recovery conditions, number of daylight hours, operator downtime, less than ideal control of skimmer settings, and inclement weather.1.4 The procedure in this guide involves the use of specific test oils that may be considered hazardous materials. It is the responsibility of the user of this guide to procure and abide by necessary permits and regulations for the use and disposal of test oil.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
标准号:
ASTM F3350-18
标准名称:
Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
英文名称:
Standard Guide for Collecting Skimmer Performance Data in Ice Conditions标准状态:
Active-
发布日期:
-
实施日期:
出版语种:
- 推荐标准
- ASTM D4919-23 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
- ASTM D4921-20 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
- ASTM D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- ASTM D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
- ASTM D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
- ASTM D4930-23 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
- ASTM D4932/D4932M-89(2019) Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
- ASTM D4933-16(2021) Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
- ASTM D4934-02(2021) Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
- ASTM D4935-18 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
- ASTM D4936-10(2023) Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
- ASTM D4937-96(2021) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
- ASTM D4939-89(2020) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- ASTM D4940-15(2020) Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
- ASTM D4941-06(2021) Standard Practice for Preparing Drawdowns of Artists’ Paste Paints